TOP—7. The best gas heat guns. Rating for 2021!

It is not always advisable to install water or steam heating in garages, warehouses, hangars, and sometimes in an office or country house. Not only does purchasing, installing and setting up equipment cost a lot of money, but you will have to constantly pay for it. And it’s one thing if the premises are used regularly, then there is a reason to think about performing the work. But, if you only need to inspect your car twice during the winter in the garage, or do repair work at your dacha, it’s worth looking for a more economical solution. Currently, this is the purchase of a heat gun. Before you go shopping for a gun, you need to decide why a gas gun will be the best choice for 2021.

Advantages and disadvantages

The advantages of thermal gas guns include:

versatility. Can be used for heating rooms, accelerating the drying speed of applied plaster or when installing suspended ceilings;
high performance. It takes a little time to warm up a large area;
small sizes of household models;
gas availability. The low cost of fuel allows you to optimize operating costs;
absence of any unpleasant odor.

The heat gas gun can be installed anywhere

Among the disadvantages it is worth noting:

burning of oxygen if ventilation is unstable;
high consumption, increasing operating costs;
instability of the device at low temperatures;
high temperature near the gun.

Attention! Powered by small-capacity cylinders, the device may operate unstably when half the volume is burned out.

A small bottle won't last long

How does it work

Before using a gun at home, you need to understand in detail how it is designed, how it functions correctly, and which manufacturer is the best in a given direction. This significantly facilitates the final selection of a suitable design and simplifies the operation process. The operating principle of a gas gun is as follows:

The combustion chamber contains a special burner into which a gas flow is supplied.
Using the ignition device, the gas burns and the heat exchanger heats up.
The fan draws in cold air from the environment and directs it through the heat exchanger.
A thermostat specially integrated into the circuit protects the unit from overheating and breakdown.
The presence of a switch breaks the electrical circuit when the room is heated to the desired value on the thermometer.

How to choose a gas heat gun

The most difficult thing is to make a choice, since the catalogs contain a huge number of interesting design items with unique technical characteristics. In order to buy a gas gun and not make a mistake, it is important to compare with electric and diesel designs. Some people prefer electric guns, where the main heating element is a heating element or a cylindrical spiral. However, it is important to understand the uneconomical nature of such a purchase for the future. Below are rated gas guns that have proven their effectiveness and cost-effectiveness of use.

Manufacturer

Ballu Industrial Group brand products are professional heat generators that do not require installation. All guns are mobile, and with the help of a special handle they can be easily and quickly transported. Photos of such cylindrical models can be found on numerous websites on the Internet, but before purchasing, measure the area of the heated room and do not save on such an important purchase. Below are a few guns that were of particular interest to buyers:

model name – Ballu BHG-10;
price – 4,800 rubles;
characteristics - heating power 10 kW, direct heating method, heating area - 100 square meters, fuel - propane, operation at 220 V;
advantages - compact size, 0.7-0.8 kg/h, ease of use, accessible operating instructions;
There are no cons.

The second model of the same manufacturer, no less popular among the masses, is presented below:

model name – Ballu BHG-40;
price – 6,800 rubles;
characteristics - overall Bally model with a heating power of 33 kW, ignition system - piezoelectric element, fuel - gas, consumption - up to 3.3 kg/h;
pluses - the gas gun covers more space for heating than its predecessor, operates in an economical mode;
cons – high price.

Gas heat gun shape

The models presented below are from different manufacturers, but have an identical cylindrical shape. Such heat guns are especially convenient for everyday use, are easy to transport, and do not take up much space. The original design does not interfere with the performance of basic functions; the main thing is not to clutter the outlets. Here are some great deals for your household needs:

model name – Elitech TP 10GB;
price – 4,200 rubles;
characteristics - dimensions - 440x290x186 mm, fuel - propane, butane, designed for heating small areas, manual power adjustment at a maximum of 10 kV;
advantages - quick heating of the room, absence of toxic fumes, affordable pricing;
There are no cons.

The second gas gun is also in noticeable demand, but in terms of parameters it is a more powerful unit, therefore the electricity consumption is somewhat higher. This:

model name – FUBAG Bruce 30;
price – 7,300 rubles;
characteristics - dimensions - 645x375x510 mm, maximum power - 30 kW, weight - 11 kg, cylindrical shape;
advantages - ease of use, the ability to quickly heat up the room, compact size and streamlined shape, flame control function;
cons – high price.

Heating method

Indirectly heated gas guns are more often purchased because one of the advantages is environmentally friendly operation and the absence of toxic combustion products in the air. Direct heating positions are also in demand, but they are purchased in the presence of high-quality ventilation and in the case of an unhindered supply of oxygen in unlimited quantities. Here are interesting offers for household needs:

model name – Pegas PG 150;
price – 4,200 rubles;
characteristics - power - 15 kW, room volume - 300 square meters, gas - propane, butane, piezo ignition, fuel consumption - 1.1 kg/h, mains power - 220 Volts, indirect heating;
advantages - the presence of instructions for use and a drawing in the package, fast heating of the air, energy savings;
There are no cons.

The second indirect heating gas gun and its brief technical characteristics are presented below:

model name – Prorab EH 2 R;
price – 4,400 rubles;
characteristics - power - 2 kW, weight - 4 kg, rectangular shape, air flow is 184 cubic meters / h;
pros - an excellent model for repairs and household needs at an affordable price;
There are no cons.

Power

This is a determining criterion for selection, on which the rate of heating of the room and energy consumption depend. For domestic purposes, 10 kW is enough, but for large areas it is better to pay attention to the maximum power limit of 30 kW. Here are two proposals that are considered “hot” on the domestic market:

model name – Sial KID 10 20821017;
price – 4,300 rubles;
characteristics - indirect heating, gas - propane or butane, power - 10 kW, cylindrical gun, no electronic sensors;
pros - convenient and reliable gas gun at an affordable price with good technical characteristics;
There are no cons.

A competitor in terms of power is the following products from a domestic manufacturer of gas guns:

model name – Bison Master 10;
price – 4,500 rubles;
characteristics – power – 10 kW, fuel consumption – 0.75 kg/h, runs on gas (propane, butane);
advantages - fast and free delivery of Zubr MASTER in Moscow, affordable price, high technical performance;
cons – customer reviews are not always positive.

Heating area

Many buyers choose a gas gun based on the heating area, and to do this, the first thing they do is measure the room. This is a mandatory condition, otherwise the purchase will end up being completely useless. Gas structures on sale are standard, so all that remains is to decide on the company and your final choice. So:

model name – REDVERG RD-GH30;
price – 5,600 rubles;
characteristics – power – 30 kW, presence of an overheating sensor, flame control, heating area – 300 square meters;
pros – covers large spaces, affordable price;
disadvantages – the need for artificial ventilation.

Here is the second gas gun, which has a shorter range, but is also characterized by rapid heating and minimal energy consumption:

model name – Caliber TPG-15;
price – 4,400 rubles;
characteristics - heating area - 110 square meters, power - 15 kW, floor-mounted installation, weight - 6 kg;
pros - compact model at an affordable price with high technical characteristics;
cons - the gun is used for warehouses with forced ventilation.

Gas gun dimensions

For individual buyers, the dimensions of the structure are important so that the unit does not take up much space in the room and does not turn out to be unnecessarily bulky. The parameters are standard for household purposes, but there are more compact options for convenient storage. This:

model name – Profteplo KG-18 4110800;
price – 5,200 rubles;
characteristics - dimensions 470x225x397, weight - 6.6 kg, power - 18 kW, metal case, gas operating principle;
advantages - lightweight, comfortable, compact, inexpensive design with high technical performance;
There are no cons.

An example of another compact gas gun is presented below:

model name – Neoclima NPG-10;
price – 3800 rubles;
characteristics - dimensions - 394x200x390mm, weight - 5.6 kg, direct heating type;
advantages - low price, minimal fuel consumption, convenient home use;
cons - more often used in small spaces - in warehouses, garages.

Types of gas guns

Before making the final choice, it is important to find out what types of designs exist and which option is optimal in a particular case. The gas heat gun is very popular; it is necessary for heating and ventilating residential premises and drying large objects. The range is wide, but the classification provides only two design features - direct and indirect heating. Both options are suitable for household needs, but have different appearance and operating principles.

Direct heating

In this design, air flows are not purified from burning, so they all collect in the living room and poison oxygen. Directly heated gas guns are needed where there is sufficient natural or artificial ventilation. This is the main disadvantage of the gun, but significant advantages remain 100% efficiency, minimal energy and fuel consumption.

Indirect heating

The ring heat exchanger acts as the main heating element, which operates on the following principle: first the gas is burned, then the toxic products that are released during the formation of the fuel. An indirectly heated gas heat gun is an environmentally friendly device, so its installation indoors is possible even with limited ventilation. The disadvantage of the mechanism is the presence of a chimney, which complicates the mobility and transportation of a gas-type gun.

Gas gun device

Such a home heater is used for domestic needs, and the preference of modern buyers is given to mobile types of gas “burner” with wheels and control knobs. Stationary guns are equipped with a gas cylinder, which is problematic to transport. The duration of operation of the unit itself and its technical characteristics depend on its volume. This stationary design of an indirect blow gas gun is considered obsolete and impractical to use; mobile models in the range are more in demand.

Gas heat gun

This is an independent heating device and a structural component of a heating installation, necessary to maintain the necessary climatic conditions in a residential area and beyond. A natural gas heat gun can be used to heat automobiles and special equipment, and is useful during repairs and for installing suspended ceilings. The presence of a fan allows you to speed up the technological process, and the built-in thermostat controls the heating of the air flow. The gun operates on gas; a suitable model can be ordered in the online store.

Propane gun

It is also called a loudspeaker because you can hear a loud bang during operation. If the previous model operates on gas, then this unit has its own design features. A propane heat gun is an environmentally friendly device and is often used to scare away birds and wild animals. Among the advantages, experts highlight simplicity of design, lightness and efficiency.

Popular models

There are many models of gas guns on the modern Russian market: Master, Ballu and many others, but we will consider only the most popular ones.

Master BLP 10M

A compact gun with a power of 10 kW, its operating speed is up to 300 cubic meters/h, and its consumption is more than modest - 0.75 kg/h. The connection is single-phase, the installation weight is only 4 kg, it uses liquefied propane, and costs from 4.7 thousand rubles.

BLP 53M

This model has a capacity of 1450m3/h. Its power despite its small dimensions is impressive - 5300 W, and gas consumption - 3780 g/h. Therefore, its price is much higher - 10 thousand rubles. It is used for heating large shopping centers, supermarkets and industrial premises: repair shops, factories and workshops.

Ballu BHG-20 S

This is a representative of the middle class in the price category, it can operate on propane and butane, the heating speed is 500 cubic meters. m/hour, gas consumption - 1.2 kg/h, power - 18 kW, weight - 4.9 kg, and price from 5 thousand rubles.

All of the above models use a piezoelectric element to ignite the gas and are among the 10 most purchased models. Master is a US brand, but the country of origin today is Italy, and Ballu is a domestic development. For clarity, I advise you to watch a video about the functionality of Ballu:

How to use a gas gun

If a person is superficially aware of how to turn on and off the specified mechanism, this does not mean that he is perfectly familiar with the use of heat guns. The principle of operation and operating rules can be studied in the instructions; if necessary, use the help of a specialist. When using a stationary gun, the following rules must be observed:

Avoid the presence of flammable substances in the room to avoid their ignition.
Ensure unhindered access of oxygen, due to which the gas gun actively supports the combustion process.
It is forbidden to block the outlet or turn on the fan.
Since air must circulate and not accumulate in the heat gun, it is necessary to install the unit in an open area to prevent clogging of the outlets.
Supply gas if the gas gun is not broken and is working properly.
Turn on the ignition button until the piezoelectric element or piezo ignition is activated.
To prevent fuel leakage, it would be advisable to additionally introduce a fuse into the circuit.
You should not save on fuel, otherwise the gas heat gun may very soon fail.

How to drink soda according to Neumyvakin
Pimples in hair
Cupcake Recipes

The costs of their work

An ordinary gun, capable of heating up to one hundred square meters, can be very inexpensive. All that is required for its continuous operation is a constant connection to the network to power the fan, and an uninterrupted supply of gas from cylinders.

Their operating time is limited only by gas reserves. To accurately understand how much it will be needed, you can make a simple calculation.

One installation of this type, when operating, consumes approximately one liter of gas per hour. Consequently, on one fifty-liter cylinder, such a device can uninterruptedly supply heat for about two days.

The power that will be needed is also easy to calculate. But, for this, you will need to do more arithmetic operations.

First, you need to multiply the volume of the heated room. On the heat loss coefficient. For convenience, there are only four of them - from 4, the largest, and meaning poor thermal insulation, to 1, meaning that the room has a good degree of thermal insulation.

The resulting figure is multiplied by the difference between the outside temperature and the one needed in the heated room.

The next operation converts the resulting figure, indicating the amount of heat in kilocalories, into the usual kilowatts. To do this, it must be divided by 860.

The value obtained as a result of all these operations will be the required power of the heat gun for heating it.

Application

Such gas-powered equipment is in demand in everyday life and in production and has found widespread use among the masses. This is not only quick heating of residential and non-residential premises, but also drying of individual items for automotive and industrial purposes. In addition, the use of a gas gun is appropriate for large areas - from 25 square meters. meters, during repair work, for example, when installing suspended ceilings.

For garage

These non-residential premises are characterized by dampness, which only hinders the storage and safety of a personal vehicle. To dry the walls and remove fungus from the far corners, it is recommended to use gas guns for the garage. The purchase is not cheap, but the unit can additionally be used at home and in the country. It is important to take into account such parameters as the size of the garage, the quality of thermal insulation, and the presence of people in such non-residential premises. There are two options for choosing guns:

A gas gun can be used when there are no people in the room. The unit provides high operating power, fast heating of the garage, and minimal energy costs.
A diesel gun is appropriate if people are or live in the garage. Thanks to the presence of an exhaust pipe, combustion products are efficiently removed and do not settle on the walls.

For heating residential premises

Considering the comparative characteristics described above, it becomes obvious that stationary direct airflow structures are not suitable for heating the specified space. A gas heat gun for residential premises must be equipped with an exhaust pipe so that combustion products do not linger in the living room. In addition, it is important to obtain high efficiency with minimal energy consumption.

For suspended ceilings

When carrying out repair work, this unit is also necessary. A gas heat gun for installing suspended ceilings is an indispensable “tool” because when PVC film is heated to 65 degrees over the entire surface, it becomes elastic and pliable. The material easily lies on the ceiling and is firmly attached to pre-prepared gaps. If the gas gun is turned on when performing this type of work, condensation does not accumulate on the base plate while attaching the PVC film. This is one of the important advantages of the participation of the mechanism during repair work.

Connection and operation

Before turning on the device, you need to read the instructions, where all the nuances of connection and use are described very clearly. You need to pay special attention to situations when you cannot turn on the device:

with increased dust content in the air mass of the room;
if there are vapors of explosive substances;
the exit hole is blocked by something.

Operating rules and safety measures may vary between manufacturers of different models - please study the attached documentation before starting work.

Gas heat guns are very economical compact products, characterized by a high volume heating rate and efficiency, so they are considered by gas equipment specialists to be an ideal option for heating various large-volume areas. I would like to note that Russian heat guns are not inferior in technical characteristics to foreign brands, and their design is almost identical, so there is no point in overpaying.