Operating principle and use of Tepleko heaters

Installation recommendations

In order to install the heater with your own hands at home, you must follow the instructions and assembly diagram.
So, first of all, you need to decide on the place in the room where you plan to install the device. After this, you need to glue a strip of penofol to the wall. Make sure that the installation site is located at least 20 centimeters from the floor.

After this, the brackets (right, left and center) should be screwed to the wall - it is on these parts that the device will subsequently be supported, so this procedure must be carried out carefully and carefully. Now you should begin installing the heater itself. You can also connect the thermostat at this point. After this, you can carry out the procedure for connecting the device to the electrical network and connecting the wires.

Next, the hanging screen and stand are installed. They are secured with screws.

4 Correct installation of heating equipment

The trouble-free operation of heaters, as well as the efficiency of their operation, will largely depend on how correctly the equipment is installed. When installing equipment, the following requirements should be taken into account:

• Heaters must be installed at least 25 centimeters from the floor.
• The wall where the heater will be mounted should be covered with foil foam, which acts as a heat reflector.
• By attaching a quartz heater to the wall, you can connect the device to the mains.
• In a large room, you can use several heaters at once, which are mounted opposite each other or at a minimum distance of 5 meters.
• If necessary, install a hinged screen, which is secured with screws or special fasteners.
• There is no need to lay an individual power wire for the heat device.

Installing a quartz heater is not particularly difficult, so it is quite possible to carry out such work yourself. The delivery set will include all fasteners and clamps that allow you to firmly fix a 12 kg heating device.

Varieties

All MKTENs are divided into two main classes, which determine the application features:

• with infrared heating;
• with convection

Popular model

Infrared

Infrared heater models use the properties of infrared light to increase temperature. The heating elements in it are lamps with quartz glass; inside there is a tungsten filament with high resistance. Sometimes other refractory metals are used instead of tungsten.

The infrared method heats the room using rays of the appropriate spectrum - the temperature rises in the places where they hit directly.

Infrared on the wall

Convection

Convection modifications heat the air itself due to its movement in the room. Convection, or air movement, occurs using natural heating or a fan system. In the first case, the air moves due to heating - the warm air rises up, making room for a new portion; in the second case, it moves artificially through the air supply.

Convection

Design and principle of operation

The design of the quartz heater is a monolithic body made of high quality molten quartz sand with the addition of marble chips, inside which a heating element in the form of a chromium-nickel spiral is laid. Current passes through the spiral, thereby heating it. The operating temperature of the heating coil is 980°C, but during operation of the heater it only heats up to 120°C. Low heating temperature allows you to extend the service life of the heating element.

Delivery set of TepplEko company

The body is highly inert, so the device takes a long time to heat up and takes a long time to cool down. This has both a positive side (even in the event of a power outage, the devices will still be able to give off heat to the premises for some time (about 1.5 hours after the shutdown)), and a negative side (if quick heating of the room is required, a quartz wall heater is unlikely to cope with this task , it takes 20-25 minutes to heat up to a temperature of +95°C).

The operating principle of a quartz heater is similar to the functioning of a Russian stove, which accumulates thermal energy and constantly releases it to the room. This effect is achieved thanks to the properties of quartz sand.

Thanks to the design of the device, natural convection occurs: cooled air is drawn into the space between the heater and the wall, where it is heated, rises to the top and exits at the top of the device.

When choosing any electric heating device, one of the main criteria is safety. A quartz heater is a fireproof device. This is achieved by the fact that the heater is located inside the device and does not come into contact with air. In addition, the device does not heat above +95°C, this is not enough for the body to begin to melt, because... The melting temperature of quartz sand is about 1700-1728°C (due to high internal friction it is difficult to determine the exact figure, but even the minimum temperature is not enough to start the melting process). In addition, each manufacturer produces protective grilles, which eliminate the possibility of accidentally getting burned.

The protective grille prevents accidental burns. This accessory becomes especially relevant if there are small children in the house. Its cost is 1100 rubles/unit.

Advantages and disadvantages

Now we will look at the positive and negative traits. Since we are considering two types of this heating equipment at once, we will divide the article into two parts. First, let's look at the pros and cons of infrared models.

Infrared quartz heaters are characterized by the following positive features:

The glass tube in quartz IR heaters is both a plus and a minus. It is fragile, but protects the oxygen in the room from combustion.

• Compactness - they easily fit even under the table;
• Rapid heating of rooms – heat begins to be generated almost immediately;
• High efficiency - almost all electricity is transformed into heat;
• These devices do not burn oxygen - as we remember, the hot spiral is sealed in a sealed glass tube.

There were some downsides:

• Not a very presentable appearance - whatever you say, such devices still spoil the interiors of rooms and non-residential premises;
• Low safety - if children play in the room, you need to somehow protect the equipment from access (the child can get burned);
• Fragility - if the heating element accidentally breaks (and there is every chance of this), then it will be easier to throw away such a device than to repair it.

The shortcomings turned out to be serious, some of them cannot be ignored. You also need to protect your equipment from bumps and falls, otherwise it will be difficult to avoid its failure.

The most striking disadvantage is the high temperature of individual parts. Not only children, but also adults can get burned by it. And the outstanding advantage is mobility - these devices can easily be moved from place to place.

Energy-saving wall-mounted quartz heaters for home and garden can be called stationary heating equipment. They are attached to the walls and remain there throughout their entire service life. Let's look at the positive features:

Wall-mounted monolithic models have a quite decent appearance, which distinguishes them from their infrared counterparts.

• Low case temperature – it does not exceed +95 degrees;
• Equipment safety - you will get burned only with the most intense heating. If small children are playing indoors, simply reduce the temperature;
• High heat capacity - the same devices from Tepleko and Teploplit can retain the accumulated thermal energy for an hour and a half;
• Impressive efficiency - one block warms 15-16 square meters. m, consuming 0.4-0.5 kW of electricity. For electric heating equipment these are amazing results;
• There is no effect on air parameters - the amount of oxygen and humidity do not change during operation of the equipment;
• The ability to work in the “anti-freeze” mode is an excellent opportunity to prevent your dacha or country house from freezing.

There are almost no disadvantages:

• Decent weight of the equipment - due to the use of quartz, one module weighs about 12 kg;
• Intense heating can cause burns - make sure that your children do not try to touch the interesting warm thing hanging on the wall.

Otherwise there are no shortcomings. Quartz monolithic heaters can work in absolutely any room, from rooms to a damp and always wet bathroom. They are easy to install and do not lead to huge energy costs. The limited power of the equipment causes some inconvenience, so to warm up a large area you should use several heaters - you won’t be able to find a more powerful model.

Installation and operation

Almost anyone can install and connect a monolithic quartz heater; it does not require any special knowledge or skills. The only tools you will need are:

• Drill or perforator (depending on the wall material) + drill or drill ⌀6mm;
• Hammer (for hammering in dowels);
• Screwdriver (for attaching the bracket). It is necessary to fix 3 brackets (one for fixing the upper part, the other two for the lower part)

The heater itself must be mounted on the wall in compliance with the following requirements:

• The distance from the floor to the bottom of the appliance must be a minimum of 10 cm and a maximum of 30 cm;
• The distance to the window sill is at least 10 cm;
• The distance from the back of the device to the wall is 4-5 cm.

Advice! It is recommended to finish the wall surface behind the heater with a heat-reflecting screen. This minimizes heat loss in the room.

If the heating system is controlled by a thermostat, then it is usually installed at a distance of 150 cm from the floor (but not less than 120 cm). In addition, it is prohibited to install it above a heating device.

Main models of quartz heaters

The delivery set for quartz heating devices includes: the heater itself, 3 mounting brackets, a wire and a plug.

If you think that now we will begin to list dozens of names of manufactured quartz heaters, then you are deeply mistaken. The thing is that TeplEko produces one single heating device - a stove of standard power. As we have already said, this is a neat thin slab of quartz sand, which has been given a certain shape. The aesthetic appearance is created due to the pattern applied to the front surface.

The standard package includes wall mounting brackets (3 pcs.), a 1 meter long electrical cord and an unconnected detachable plug. That is, the device can be plugged into an outlet or powered through a thermostat , without a plug. As for the thermostat, it is purchased separately - it is inexpensive, so the purchase will not become an additional financial burden.

Instructions for use

First, inspect the device. Make sure it is intact and free of any damage. Also check that the cable and socket are working properly. These procedures will help avoid short circuits in the electrical network. After this, turn on the heater.

Before starting operation, carefully read the instructions that come with the device. Strictly follow all recommendations and advice to avoid breakdowns.

Do not touch the hot surface with your hands as it is quite hot and can cause serious burns. Do not cover the heater as this may cause internal overheating. Also, do not use the device if the room humidity level exceeds 95%.

If you find any defects or breakdowns, immediately take action to eliminate them. If you are not confident in your abilities and do not have sufficient technical knowledge, and also if the device is still under warranty, entrust the repair to specialists. Independent intervention can only worsen the situation and lead to irreparable consequences.

Characteristics

A quartz heater from is a device with energy-saving characteristics. The devices fall into the category of being economical in terms of cost and compact in size. Moreover, the unit can be used in a variety of areas and for different purposes, as it is universal.

As for the technical characteristics of an electric quartz heater, these include the following indicators:

• power equal to 400 watts;
• daily power consumption is only 3.5 kilowatts;
• the device weighs 12 kilograms;
• has a “hot brick” effect.

The heater is wall-mounted, so it saves space. Most often, it is chosen by owners of small houses and apartments, as well as those who want the heating device to look minimalist and concise, not attract too much attention and not have too bright a color.

Features of TeplEco heaters

To begin with, we will immediately highlight the main feature of TeplEco quartz heaters - they are decent efficiency, practically unattainable for other electrical devices. The equipment turns out to be very effective, economical and inexpensive. How did the developers manage to add such remarkable results? It's all about the design of these devices, which are based on quartz sand.

By the way, it is precisely because of the quartz sand that this equipment turns out to be so heavy - unlike the same convectors, products from TeplEko have a significant weight.

The TeplEco quartz heater is a monolithic slab created on the basis of environmentally friendly quartz sand. A special solution is created from it, hardens and forms a kind of slab. Inside this monolith there is a chromium-nickel heating element, which ensures rapid heating of the entire structure. The heating element is highly reliable and has a long service life.

TeplEco heaters consist of a monolithic quartz slab into which a heating element is mounted.

On/off control is carried out using a miniature switch. To ensure automatic thermoregulation, you will have to purchase an additional thermostat that is connected to the open circuit. Connection to the electrical network is made using an ordinary cable with a plug. There are no additional regulators, toggle switches and multi-position switches, as well as electronic control units in the design of these quartz heaters.

What is so remarkable about heaters from TeplEko?

• Low power - the cost of heating residential premises will decrease by 1.5-2 times;
• Easy installation - just screw the device to the wall;
• Fire safety – quartz does not burn;
• Proper build quality – ensures long-term operation of the equipment;
• The presence of additional accessories is a direct path to more convenient operation.

It should be noted that the magnesium salt present in the monolithic slab is a source of useful ions. The monolith created by TeplEco is not afraid of dampness and does not grow moldy, does not generate dust or attract dust, has antiseptic properties and is resistant to aggressive substances (for example, detergents).

Accessories include special wall-mounted clothes dryers, floor stands, self-adhesive wall reflectors, metal screens for heat reflection, as well as power controls, thermostats and SMS-controlled smart plugs.

These heaters operate absolutely silently, can be used in damp rooms, and are not afraid of water and direct sunlight. The entire installation involves fixing the device to the wall using the supplied brackets. If necessary, buy a floor stand and install the device where it is needed - that is, it can work both as an auxiliary and as the main equipment for autonomous heating.

Are you afraid of moisture?

Monolithic quartz heaters for cottages and homes do not have the disadvantages of lamp analogues due to their design.

During manufacturing, the heating elements are placed in a slab, the main component of which is pressed quartz sand. This production technology makes it possible to completely limit the heating element from environmental influences.

Quartz heaters do not dry out the air, and systems with a built-in fan heat the room with almost the same efficiency as convectors. It is prohibited to use an electric convector for wet rooms, but an electric heater based on quartz is not afraid of moisture.

Based on this, to heat a private house or apartment, it is better to install heating systems with quartz filler.

Does oxygen burn?

Heating of a room occurs through rays, just as the sun's rays enter a room, heating it.

Oxygen is burned off by heaters that use an incandescent element to burn the oxygen. In TeplEko such elements are not used.

Where is it produced?

Tepleko is produced by a Russian manufacturer with characteristic Russian management, so it is important to correctly set expectations from this product and the service for the sale and maintenance of this product

Will it be possible to do without other types of heating in winter?

In fact, TeplEco can be considered as an inexpensive heating system, but you just need to understand that this is not a non-volatile heating system, so in the event of a power outage there is a risk of being left without heating at all.

Pros and cons of using quartz heating

Infrared and monolithic heaters have gained wide popularity for good reason. They have a number of undoubted advantages:

High efficiency. Heating costs go almost entirely to paying for heat. Affordable prices. The cost of all models is low; anyone can afford to buy a quartz heater. Simplicity of design, reliability

There are no high-tech components that increase the price and often fail. The operation of the devices is absolutely silent, which is important for many sensitive people. High work efficiency. The heating of the premises is carried out exactly as stated in the device passport

No downward deviations are observed. Lack of generation of a magnetic field that heats metal objects and, in particular, clothing accessories. There is no danger to electronic devices that accidentally end up near the heater. Attractive appearance. All devices, both infrared and monolithic, look quite presentable and do not spoil the interior of the room. Monolithic appliances can be painted to match the main details of the interior or walls. The fire safety of the devices allows them to be used for a long time. The absence of contact with air increases the service life of the filament. If for some reason air gets inside the glass tube or stove, the thread instantly burns out, which is an additional condition for the safety of the devices. Lack of contact with air eliminates dust combustion and ensures clean and fresh air. Air humidity does not change when using heaters, allowing you to maintain a comfortable microclimate. The use of automatic temperature controllers allows you to save energy.

The optimal solution for the attic would be to place heating panels on the ceiling

Along with the advantages, quartz heaters also have disadvantages:

• Heavy weight. The slabs are heavy and require two people to carry and install them. One person can lift such a heater, but there is a great danger that he will drop it at the wrong moment. In addition, the large weight requires strong installation so that the slab cannot break off the fastenings and fall to the floor. A fall will cause the stove to collapse and the heater to fail.
• The material of the plates is quite fragile and can break under external mechanical loads. During operation, this point must be taken into account; if possible, install the devices out of reach of people or animals.
• High surface temperature. Quartz heaters raise the temperature to 95° during operation. This is dangerous if there are children in the room; for adults, such devices also pose a certain threat if installed in an inappropriate place.
• As a rule, monolithic devices do not have an adjustment unit, which is purchased separately. This means that the stove heats up to the highest possible level and always works at full strength. It is impossible to operate the devices without adjustment; they create uncomfortable and sometimes unbearable conditions in the room.
• Wall mounting makes it difficult to heat the lower tier of the room, which is why the floor may remain cold, although the room is warm enough.
• The heating of the rooms is uneven; one panel is not able to fully serve the room (usually one panel is used to heat 8 sq. m of area). If the appliance is installed in a room that is too large, the temperature will rise slowly.

Wall heating panels are available in the form of paintings, which not only provide warmth, but also decorate the room

A separate disadvantage of quartz heaters is the high energy consumption. They are not cheap, and if there are several such panels in the house, then the electricity bills will be very substantial. This circumstance often forces people to refuse to heat apartments or houses with electric heaters, using them only in the off-season or as additional heat sources. In rooms or houses with a large number of appliances, to save energy, it is recommended to combine them into a single system with common control.

The thermostat will allow you to maintain the set temperature and turn off some heaters that are not currently in use. Some types of control units can be programmed, allowing you to turn off the heating when no one is home, turn it on before people return, change the operating mode and many other useful functions.

Review Reviews

If you believe real reviews from buyers of heaters from, these devices have many useful qualities. They fully meet the expectations of owners due to their high quality and efficiency.

The main advantages include a fairly budget price. Thanks to this characteristic, TeplEco branded heaters can be purchased by representatives of almost all social strata. Another positive feature that consumers highlight is its light weight. The heater is quite easy to transport from place to place; one person can handle it.

The high level of customer service is also noted, which is provided by both employees of official representative offices and the TeplEko online store. Consultants are always ready to help if the buyer for some reason does not understand why the device does not work, answering all questions in an online consultation or by calling the hotline. If the heater breaks down and is still under warranty, the period of which is stated in the warranty card, then anyone can contact the company’s service center without any problems. Specialists will diagnose the device and, if necessary, make repairs free of charge.

But in order not to be refused service, it is important not to attempt to repair the heater yourself during the entire warranty period. Otherwise, the device will not be accepted for repair.

Negative comments regarding devices are quite rare. Most often, they are associated with individual shortcomings of the units (defects or defects) or caused by users’ failure to follow operating instructions.

For information on installing TeplEco heaters in a country house, see the following video.

When frosty winter days arrive, everyone thinks about how to save on payments and at the same time not freeze. Everyone knows that electric heating is “gluttonous”, and electricity bills in winter are frightening in their numbers. But there is an electric monolithic heater, which is considered the most economical. We will talk about the Tepleko quartz heater.

It is necessary to immediately say that it is not difficult to buy a Tepleko monolithic quartz heater; this can be done both in specialized brand stores and on the Internet. This is one of the most economical heaters. Tepleko is based on quartz sand, which, by the way, makes this heater significantly heavy in weight.

Tepleko is a slab that consists of a solution of quartz sand, which subsequently hardens and forms this very panel. Inside there is a heating element that quickly warms up the entire structure. The chromium-nickel heating element serves for a long time and reliably.

The panel is turned on/off using a small switch; automatic adjustment is not provided. But you can purchase a separate thermostat and connect it to the open circuit. The heater is connected to the electrical network using a regular cable and plug.

How to choose?

When going to the store to buy the most economical heater for his apartment or house, the buyer often forgets about the points that need to be paid attention to. In an attempt to save money, sometimes a person buys a heat fan instead of a heating device.

However, it is not particularly economical - the joy of saving money will quickly turn into disappointment from incoming electricity bills.

Household energy-saving heating devices purchased for rare use and permanent residence are different. They are not universal at all and are selected based on the footage of a particular room. You need to buy safe or fire-resistant models. To do this, you need to be interested in the type of heating element; it must meet fire safety standards.

Of course, it is better to buy a model with noise reduction, but many manufacturers have many products in their lineups that do not make sounds while heating the room. According to buyers, the loudest are thermal modifications and options with a metal case. Moreover, it is worth taking a closer look at products with high efficiency: they are usually more efficient in operation.

The best modifications are equipped with a temperature sensor. Thanks to the thermostat, you can set specific temperature values ​​that are comfortable for users. You need to take a product that can heat a specific room. In this case, you will have to take into account the number of windows, the number of people in it, the presence of a doorway, as well as the type of lighting fixtures installed in a given room.

In a space with a high concentration of dust, an infrared heater is needed. It is suitable for warming up rooms where allergy sufferers and children live. For a bathroom you need a device with the required level of protection from moisture. If you want to buy an oil heater, it is better to buy a model with a heating control thermostat.

A converter analogue with a thermostat is good for small and standard rooms in city apartments and private houses. If the buyer is willing to put up with long heating times, it is worth taking an infrared model. This product is the most economical in terms of energy consumption. However, any device will not work effectively if the home is not initially insulated.

We invite you to familiarize yourself with the layout of the territory of a country house

Scope of use

The quartz heater is fireproof, therefore suitable for a children's room.
Quartz heaters are designed for heating residential, administrative and commercial premises. The universal device is installed at any facility equipped with electrical networks. Scope of application of monolithic batteries:

• country houses;
• apartments;
• private houses;
• warehouses;
• garages;
• shops and pavilions;
• industrial premises.

The units are used as constant heating and in the off-season to raise the temperature to a comfortable level. Quartz batteries can be combined with other systems. In private homes they complement water heating from a stove or boiler. In facilities where there is no central heating, the devices can maintain a positive temperature without the presence of people. The heaters are fireproof and are installed in museums, shopping and exhibition halls.

Heater Maintenance

Maintenance of heaters does not require special training of users and consists of keeping the heaters clean and safe.

During routine maintenance of the heater, it is necessary to:

1. External inspection, which checks the integrity of the wires, cord and plug, housing and insulating parts;
2. Regular cleaning of surfaces from dust and dirt;
3. Heavy contaminants are removed using detergents with the heater unplugged until the heater is completely dry;

Attention! When the heater is turned on for the first time, small current leaks are possible on the body, which are absolutely not dangerous for humans and animals. After 24 hours of operation of the heater, the oxygen contained in the air microbubbles will react with the nickel-chromium alloy of which the heating element is composed, and it will be covered with an oxide film that is absolutely non-conductive of electric current and current leakage to the body will disappear

Brand information

has existed on the Russian market for several years. During this short time, she has already managed to win the trust of consumers and a good reputation. Users of the brand's products recommend purchasing the products to their friends.

The priority areas of activity of the brand are the production and sale of energy-efficient heaters of the new generation.

Production is organized taking into account the latest scientific and technological developments. The entire process fully complies with Russian and international standards, and only professional and experienced employees are involved in the company’s work.

At TeplEko you can purchase not only single goods (which is important for individuals), but also order large wholesale quantities, which is beneficial for individual entrepreneurs and legal entities. All units received by customers are supplied from the official warehouse, which is located in St. Petersburg.

At the same time, you can purchase a heater both online (paying for the purchase by bank transfer) and in a real store. Experienced company employees will advise you on all issues of interest and help you make a choice.

Today, certified stores, as well as 2 warehouses, are successfully operating on the territory of the Russian Federation. Several of them are located in the central part of our country, and the rest are dispersed throughout the territory. The total number of consumers of these products exceeds 50,000 people.

Analogs

The most popular analogues of heaters from TeplEko are devices from Nikaten

An important difference between such units is the presence of a thermostat in the basic kit. In addition, it is important to note that these devices operate on the principle of thermal inertia

Another one . Quartz heaters from this brand are made of artificial stone, and inside the case there is a set of heating elements. The service life of the devices is about 20 years.

Tepleya is a company engaged in the development of quartz-olivine heaters, which are characterized by an increased level of safety.

What brand is this?

A company manufacturing home heating devices called Tepleko has been producing these devices for several years now. In the market, such a period is considered a rather short period, but the brand managed to gain a high level of trust from customers and earn a good reputation. Most clients recommend buying similar equipment to friends.

Important! The main direction of the company's work can be called the production of energy-saving heaters with modern technical characteristics. The production facilities of the enterprise operate using the most modern technological and scientific discoveries

All the most significant quality standards are observed, which are implemented and monitored by experienced employees

The production facilities of the enterprise operate using the most modern technological and scientific discoveries. All the most significant quality standards are observed, which are implemented and monitored by experienced employees.

The company has a network of official stores throughout Russia, as well as two warehouses for sales via the Internet. Most stores are evenly distributed throughout the country. According to statistics, the total number of buyers of goods is more than 50 thousand people.

Advantages and disadvantages

Like any other household device, a ceramic or sand heat-saving heater has positive and negative qualities that affect its efficiency and operating life.

Pros:

• relatively low price, starting from $40*;
• no noise during use;
• wide selection of colors, shapes, designs;
• There is no air drying during operation;
• the design is extremely simple;
• the device is environmentally friendly and has no negative impact on health;
• high energy efficiency.

Note! Heaters with the hot brick effect "Tepleko", although they are popular in the classroom, are not widely used due to the large number of negative qualities that affect operation. Minuses:

Minuses:

• high weight and the need for reliable fastening when suspended;
• slabs of devices made to look like stone are very fragile and can crack and break during transportation;
• lack of fastenings and handles for transportation, which makes installation and transportation problematic;
• heating duration;

limited basic equipment. For the device to be effective, you should purchase many additional functions and options; formation of cracks on the body due to high humidity in the room; inability to automatically turn off when a certain temperature is reached

To do this, you should buy a thermostat separately; The hot housing can cause burns on the skin if touched carelessly.

Why is it needed and where is it used?

• Electric heating systems based on a quartz heater are used in residential premises, cottages and country houses where gas is not supplied or the installation of boiler devices requires high costs. The technical characteristics of the tepleko quartz heater allow it to be used in addition to a diesel, wood or coal system and to a Russian stove. Today, high-quality installations from the manufacturer are the best alternative to all heating systems. Another area of ​​use is maintaining the required temperature indicators while there are no people in the room where it is necessary to maintain heat.
• The devices are perfect for heating a basement, warehouse, construction site, office space and other types of real estate.
• Many medical institutions use high-quality heating systems, which are also purchased for museums, exhibition halls, and organizations that operate buildings with many utility rooms.

Nikaten or Tepleko?

The market for quartz heaters is dominated by two Russian devices: Nikaten and Tepleko. Both models are distinguished by reliability and high technical characteristics. Therefore, buyers were faced with the question, which heater is better? To give an answer, you need to compare the parameters of both models:

Design and principle of operation

The heater heats the room thanks to its special design. So, its design includes a special plate with an installed spiral. During active operation, the surface of the unit can heat up to 95 degrees Celsius. Thanks to such high temperatures, the air in an apartment or house is heated quite quickly. Such heating can also be called convective. An infrared signal is emitted from the heating panel at the same time as the heat. Thus, the device combines several functional features, simultaneously performing the functions of a combi oven and an infrared device.

It is important to note that the stove, which is part of the design of the heater and is its integral element, is connected directly to the electrical network. The absence of additional automatic devices ensures that the device is able to maintain stable and uninterrupted operation. The quartz heater itself is a structure that is located in a complete housing made of a special material - straightened quartz sand

A small amount of marble chips is also added to it. In the inner part of the device there is a special heating device, which has the shape of a spiral

The quartz heater itself is a structure that is located in a complete housing made of a special material - straightened quartz sand. A small amount of marble chips is also added to it. In the inner part of the device there is a special heating device, which has the shape of a spiral.

Heating elements made of quartz receive current from the electrical network and direct it along this spiral. Thus, it gradually begins to heat up. The temperature indicators of the spiral are about 980 degrees Celsius. However, in situations where a special monolithic heater is additionally switched on, this temperature level does not exceed 120 degrees. Thus, it is possible to significantly increase the resource of use of the device and its service life.

The units produced and released have a fairly high inertia rate. Thanks to this, the heating element heats up and, accordingly, cools down for a long time. Thus, even after you have disconnected the device from the power supply or if this happened against your will (for example, a power outage), the room will remain at a high temperature for another 90 minutes.

Advantages and disadvantages

Advantages of the TeplEko quartz heater

An energy-saving device makes it possible to equip a house with a heating system in a short time without exorbitant costs. Owners of electric radiators do not need to buy coal and firewood.

The advantages of quartz heaters include:

The strict, laconic design of the products allows them to fit into any interior. Installing special screens with a shaped grille gives the batteries a special style.

When choosing a heater, you should find out about its negative qualities in order to avoid disappointment in the purchase:

• tepleko devices are prohibited from being installed in rooms with high humidity;
• the hot surface of the panel can cause burns;
• it takes a long time to warm up the room.