Here you will learn:
- We disguise it as an interior
- Built into the closet
- Decorating
- Placed between wall cabinets
- We mount the column behind the false hood
- Moving the speaker outside the kitchen
- How to hang a speaker inside the kitchen
- Corner kitchen option with column
- Stylistic design of a room with a column
- How to hide pipes
- Is it possible to make a suspended ceiling in a kitchen with a gas water heater?
The placement of the appliance in the kitchen is limited by rigid boundaries. It is strictly forbidden to install the unit above a sink, refrigerator, or gas stove. The minimum distance between them is 1 meter.
Access to the gas water heater should be as free as possible. This will ensure quality service and the ability to inspect the device if necessary.
In addition, the device should not be mounted too low or high. It is advisable that the burner be at eye level or at least within sight.
For residents of small apartments, where the kitchen area does not exceed 6 m², an exception is provided: they can hang the column above the sink
Recommended height:
- from the floor to the bottom surface of the device – 0.8-1.2 m;
- from the top surface to the ceiling - from 0.3 m;
- from the side panel to the wall - at least 0.15 m;
- from the front panel to the opposite wall – from 1 m.
It is better not to decorate the walls near the speaker with wallpaper and plastic panels. The surface on which installation is to be carried out must be covered with non-flammable materials. The same rule applies to all panels used to disguise the device.
We disguise it as an interior
One of the easiest ways to “bring” a gas water heater into the kitchen interior is to cover it with the same wallpaper as the walls of the room. Or cover it with a vinyl film similar to them in style and color. You can also match the shade of the film for the water heater to the kitchen unit.
The best option is to paint the speaker with non-flammable paint to match the walls or furniture. Heat-resistant enamel, which is intended for coating metal, is best suited for these purposes.
However, you can use a regular spray can, then even a teenager can cope with the task. In this case, do not forget to cover the screen and handles of the device with masking tape, and also cover the surface behind the speaker.
Make sure that the blinds do not touch the column and have an indentation of several centimeters.
Interior and column
The easiest way to fit a speaker into the overall idea of the kitchen is to decorate it by painting it with non-flammable paint or covering it with vinyl film. You can also use stencils to apply an interesting design to the surface of gas equipment. An interesting option is to decorate the speaker with magnets brought from travel or stickers.
Family photos printed on magnetic vinyl will look good on the speaker. Speakers painted with slate paint look especially impressive. On such a surface you can leave messages, write menus and simply draw.
Built into the closet
Building a gas water heater into a cabinet is the best, but not always legal, way to disguise a gas water heater. In some cities it is allowed and actively practiced, in others it is strictly prohibited. To avoid fines or, worse, accidents, develop a design for the installation, then be sure to consult with the local gas service and obtain official permission.
How to hide a gas water heater in a kitchen cabinet correctly and safely?
A gas water heater with an open combustion chamber must be hidden in a false cabinet without a top or bottom; the side walls of the cabinet must be at a distance of at least 15 cm from the side walls of the device. It is advisable to make the facade lattice, as in the photo example below. All these requirements are necessary for ventilation, creating proper draft and your safety.
By the way, in this way you can hide a gas water heater not in a false cabinet, but... in a false hood. You can see an example of such disguise in the following photo slider.
It is easier to install a gas heater with a closed combustion chamber - the cabinet can have a bottom and a top, side walls installed close to the device, and a solid door.
It is advisable that the geyser be installed approximately at the same level as the wall cabinets.
Decor or disguise?
If you have a question about how to hide gas equipment in the kitchen and fit it harmoniously into the set, first you should decide not only on your financial capabilities, but also on your personal preferences.
If your budget is small, you can do the decorating yourself. In the case when the price does not matter, and you want dramatic changes, you can cover the gas water heater with the facade of the kitchen, in other words, hide it in the closet.
Decorating
The easiest and cheapest way is to apply stickers. Choose heat-resistant materials and colors that will harmonize well with the overall interior.
If the device is located near a window, close it with a curtain. To do this, install the cornice on top, at some distance from the body. Hang a curtain made of thick, opaque material.
Do you want to create an art object in the kitchen? Then arm yourself with paints and a brush. You can paint in a themed style or paint the cladding in the colors of the walls or kitchen units. Here is the decision the owner of this model made:
The design can also be applied using a stencil and heat-resistant enamel for metal work. Quite a simple solution, especially for people without artistic skills.
Placed between wall cabinets
There are situations when it is not possible to build a speaker into a set, but it can be hidden between wall cabinets. This arrangement option is practical and does not require costs.
It must be remembered that in this case there are certain requirements:
- the distance between the side walls of the column and wall cabinets must be at least 3 cm;
- the walls of adjacent cabinets must be insulated with non-combustible material.
Important! The color of the speaker should match the set or, conversely, be a bright accent in the interior.
Properly arranging a column in the corner
If the water heater is located in the corner of the kitchen, it is easiest to put it in a corner cabinet. The requirements for it are the same as for other speaker cabinets - without a top, bottom and back wall. Essentially, it is just a door that closes the device.
Also, the corner column can be separated by a special niche, which will visually separate it from the general interior. Do not forget that the wall of the niche facing the device must comply with safety regulations - be covered with non-flammable material.
We mount the column behind the false hood
Furniture used as camouflage can easily be replaced with household appliances, using, for example, a false hood. It is quite simple to implement this idea if you make a box like a hood, and it can be either a closed monolithic form or a regular open rectangular part with a wide lower edge. This solution will provide a pleasant appearance, no need for redevelopment and ease of repair work.
This photo shows an example of disguising a gas water heater as a false hood
Another option for a false hood hiding the column
Moving the speaker outside the kitchen
This is quite a labor- and financially-intensive option. It is especially relevant if the kitchen renovation has already been completed, but the gas water heater does not fit there, or the water heater was not originally intended for this room. But it’s worth taking such a step only if there are no other options.
The new premises must comply with the standards determined by special services. The main ones are the volume of the room is more than 7.5 cubic meters, the height of the walls is at least 2.25 m, and the presence of a chimney.
Most often, the column is moved to the bathroom. However, if the bathroom is not large in size, such a step is unlikely to be beneficial. Instead of inconvenience in the kitchen, you get inconvenience in the bathroom.
Design nuances
It also happens: the gas water heater is quite modern, but you simply don’t like it for subjective reasons. Even the latest generation heating device with automatic ignition may not always meet your ideas about aesthetics.
Another option is that you renovated the kitchen, changed the set, but the speaker remained the same, and this annoys you. In such cases, there is a way out - simply disguise it using elements of kitchen furniture. Just disguise it, because you cannot place the speaker inside the cabinet - this is prohibited, in accordance with safety regulations!
The most adequate solution in this situation is a decorative panel that is mounted on the sides of the device. At the same time, this design has no back wall, top and bottom. It is important to take care of the gaps in the side panels for good air circulation.
Important: please note that before ordering such a decorative box for your water heater, you need to obtain a special permit from a representative of the regional gas service that serves your home. This document, drawn up in accordance with SNiP, should be shown to the mechanic during preventive inspections. Please note that any structures around the gas water heater are prohibited.
The technical data sheet for the product states that the column must be placed in those places that meet local standards and rules. In any case, the installation of a column in the kitchen or bathroom is carried out exclusively by a mechanic from the organization that supplies gas to your apartment. It is the representative of Gorgaz who is responsible for the installation and connection of the gas water heater; you will also receive all recommendations and instructions for operating this unit from this specialist.
Let's assume that you have not received an official document authorizing you to close the gas water heater, but you really want it to look aesthetically pleasing. How to close a column bypassing these formalities? There is a way out, and it is a quick-release overlay panel.
It is very easy to install and dismantle. Why not use this idea if the modern generation of geysers do not heat up as much as their predecessors, and the removable panel provides air access and good traction? For your part, you will avoid safety violations and create a separate interior element that hides the column.
To summarize, it is worth noting that the gas water heater in the kitchen can be hidden behind a decorative panel, but it can also be made into an original object in the interior. Whatever path you choose, remember that the safety of your family is more important than aesthetics and designer trends. We hope that the article was useful and helped resolve the problem!
In accordance with applicable law, the Administration disclaims any representations and warranties that may otherwise be implied and disclaims liability in relation to the Site, the Content and its use. More details: whitestrip.ru.html
Was the article helpful? Tell your friends
How to hang a speaker inside the kitchen
If you need to move the device less than one and a half meters, you can take this step without much thought - it will not require special permits or financial investments.
If the distance exceeds this figure, the action will be regarded as a reinstallation, therefore, it will be necessary to make changes to the existing project and lay gas lines.
You definitely can’t hang the column over a gas stove; it’s best to discuss other options with a specialist first.
When moving an appliance inside the kitchen, you need to carefully consider the rationality of this action and determine its pros and cons. Decide in advance what you need the free space for and whether the speaker will become a hindrance in the new location.
Corner kitchen option with column
Corner placement of a kitchen set is one of the most convenient. This becomes especially true in rooms that are relatively small in size. For a room with a gas heater, this type of furniture arrangement is used very often and allows you to save space. In this case, the heating system itself should be located on a shorter wall. This will bring additional convenience when several people are here at the same time, and will also not interfere with the cooking process.
A speaker in the corner of the kitchen, covered with wall cabinets, will not be conspicuous
In relation to the small kitchen space of the Khrushchev, in order to reveal the overall intended style of interior design, you will have to use all the possibilities. Even a refrigerator, which is usually purchased in white, will need to be decorated with different elements.
Furniture for hidden speaker placement can be ordered
Having a gas water heater is not a death sentence. With a proper and attentive approach to design, taking into account all the nuances, as well as following the advice in this article, you will be able to adequately decorate your small kitchen and have a great time in it.
Why install a column
A gas water heater in an apartment or house is necessary for comfort. The lack of hot water can infuriate any housewife. A gas water heater will make the process of cleaning, washing dishes, cooking, and taking a bath convenient and simple.
Unlike old generation water heaters, modern water heating devices are safe and easy to use.
The main function of a geyser is to heat water. On some models, an electronic thermometer is installed, which displays the water temperature on the device screen.
Stylistic design of a room with a column
Those who are planning to carry out a large-scale upgrade of their kitchen design and implement a certain interior style in the room should think in advance about how a gas water heater will look in the new conditions.
We recommend paying attention to the following stylistic options:
- Provence. Ideal for small kitchens. It implies a combination of white facades with a column of the same color. Allows the presence of still lifes and floral arrangements, which may be present as a pattern on the front of the column.
- Loft. The general style idea is the open placement of a gas heater and communication pipes. To make the device fit better into the loft style, you should remake the case for a high-tech device.
- Country. Involves the use of a delicate color palette. The color of the speaker body does not matter in this case, since it is covered with a cabinet with a blue, peach or white facade.
Rustic, industrial, Mediterranean, and rustic styles are also suitable for rooms with geysers.
In most popular styles, the water heater is not hidden, but is positioned as an authentic attribute, a full-fledged interior decoration. If designed correctly, this option for placing a column looks especially impressive.
To achieve greater compliance with the overall design idea, the geyser is often decorated with additional thematic elements.
How to hide pipes
In addition to the column, problems often arise with pipes and chimneys. In order for the repair to be complete, they often also have to be masked. In stores you can pick up a kit that helps you hide pipes. It consists of boxes and panels. Everything goes together easily and quickly. In the photo you can see the result of using such an acquisition.
You can also create a similar kit yourself. An excellent material would be plywood or drywall.
To hide pipes and a column, you can order furniture according to an individual project
You can hide the column using plywood or drywall
Ways to disguise communications
In addition to the gas heater itself, masking also requires many communications connected to the device. We are talking about the chimney, water and gas pipes, hoses and other structures necessary for the operation of the device. As a rule, they do not look very aesthetically pleasing.
It is better to decide on methods of masking communications at the stage of ordering furniture or planning renovations. The simplest and most cost-effective option is to paint the pipes to match the walls. You can also cover the hoses with special masking panels, which are usually supplied with the column.
If such panels are not included in the kit, they are made independently using drywall. But you need to take into account that the box should not be solid, easily removable, and have an inspection hatch.
Due to many restrictions and requirements, many leave the main pipe from the column open. To make it less noticeable, experts recommend installing the device near the chimney. Gas pipes can be covered with a removable apron
In apartments where the gas line is installed along the kitchen apron, the pipes are hidden using a railing system. This is a metal structure designed for attaching shelves or hooks for kitchen accessories.
Another original option for masking communication pipes is decorating with bamboo panels. We looked at more ideas on masking a gas pipe in the kitchen in the article: How to hide a gas pipe in the kitchen: methods of masking and rules for constructing a box.
Is it possible to make a suspended ceiling in a kitchen with a gas water heater?
To answer this question, you should find out what requirements are stipulated by regulatory documents. To cover the surface above a gas water heater, only non-combustible materials with an index of at least M1 are used - they cannot ignite on their own and cannot sustain combustion. This is the category assigned to film stretch ceilings.
During installation, several nuances are taken into account:
- the distance from the gas water heater to the suspended ceiling is at least 30 cm;
- heating temperature maintained without deformation of the ceiling material is 70°C;
- if the chimney goes into the ceiling, a gap of at least 30 cm around the circumference is left near the pipe.
Stretch ceilings in a kitchen with a gas heater are a good option that meets fire safety requirements. Existing regulations limit the use of flammable materials only.
The combination of a gas water heater and a suspended ceiling fully complies with SNiP and SP. Separately, it can be noted that the material does not contribute to the development of mold and the accumulation of condensation, which is considered an additional advantage that increases the operating comfort of the water heater.
Important Rules
Anyone who is going to hide communications must take into account one important rule.
You can hide pipes, a counter, a column. But! All units must be provided with free, easy access at all times. It is forbidden to tightly sew up communications.
This means that the gas pipeline can only be hidden with removable structures, for example, a special casing or fire-resistant plasterboard box. But it is prohibited to hide it in grooves or in the thickness of the wall.
Depending on the style of the kitchen, you can use the equipment in different ways.
Such a box should be easily and quickly removed to allow inspection and repair of gas services.
If communications could be transferred, then perhaps the problem would be solved much easier. But such a service is often expensive, and permission for it is very rarely issued.
