Design of your apartment and gas boiler: how to hide the device? Rules, ideas and photos

Rules and regulations to consider

Gas boilers are not simple devices and require compliance with certain installation rules. First of all, for its installation you need permission from gas services. When the equipment is in good working order and the chimney is clean, then there should be no problems. Further, if you do not want problems with the governing bodies, you must adhere to the following rules:

• gas boilers are installed only in non-residential premises, such as the kitchen;
• ventilation is required;
• the kitchen should be separated from other rooms by doors;
• the room must have at least one window;
• finishing, in particular the ceiling, must be made of non-combustible materials. It is prohibited to use a gas boiler with suspended ceilings, because if they ignite, additional harmful fumes may occur;
• when installing the boiler between cabinets, you need to provide space for free air circulation;
• if the ceilings in the house are wooden, then the wall behind the boiler is covered with a sheet of metal.

Standards for distances between the boiler and kitchen items are also observed:

• from the boiler to the floor - 80-160 cm, from the ceiling - 80 cm;
• from the walls of the “camouflage cabinet” on the sides - at least 5 cm, in front - from 10 cm. The boiler in the cabinet must be closed with a door with a grill;
• to household electrical appliances and stoves - at least 30 cm;
• from the meter must be placed at a distance of 1.6 m or more;
• The socket for connecting the device is located at a distance of 1 m.

A gas boiler in the kitchen can be hidden, but do not forget about the standards.
The room in which the boiler will be installed must be at least 4 m2, the ceiling height is from 2.5 m. The power of the gas appliance is selected no more than 60 kW and it is advisable to install gas leak warning sensors.

Recommended boiler types

Today, manufacturers offer a large selection of gas boilers for private use. These can be standard models or designer devices that match in color and size. According to technical characteristics, all heating devices are divided into:

• single-circuit and double-circuit;
• open and closed type;
• with different ignition systems;
• floor and wall;
• with different power.

Which one to choose is dictated, first of all, by the parameters of the room, then only by individual preferences. The differences between open and closed boilers are in the removal of exhaust gases - through a standard or coaxial chimney. The second option is preferable, because does not require natural ventilation and can be installed even in small rooms.

Devices with two circuits benefit from single-circuit ones in that with their help the house can be provided not only with heating, but also with hot water without using a boiler.

The ignition system is also chosen independently. Of course, automation is more in demand, because... It starts heating itself as soon as gas enters it. In manual boilers, the ignition function must be performed by the user using matches or a lighter.

The gas boiler will be floor-standing or wall-mounted, depending on the parameters of the kitchen. Both of them can be “introduced” into the interior and connected to a common heating system. The difference between them is in price and size. Wall-mounted devices are more compact; they can be placed anywhere in the kitchen without cluttering up the usable space. The only disadvantages compared to floor-standing units are low power and lower efficiency.

Features of kitchen design with a boiler, photo examples

The specificity of the boiler is that its appearance can hardly be called aesthetic. Therefore, it requires a certain playing out and design.

The decision on the design must be made before installing the boiler

When planning a kitchen design with a gas boiler, the following aspects must be taken into account:

1. The opportunity to spend a certain amount of money on the purchase of the selected brand of boiler. The more expensive this equipment is, the more compact it is in size and has a more attractive appearance.
2. Installation in a certain area must comply with all the rules required by the gas service, as well as ease of use by residents of the apartment.
3. Do not neglect the style of the room that you plan to implement. The design methods for the boiler or geyser depend on this.

A gas boiler can highlight the style of the kitchen interior

In the interior of this kitchen, a wall-mounted boiler plays the role of an accent

Nuances of masking communications

Open gas pipes and valves do not look very nice. This can be corrected by placing them in a decorative casing. There are many options for these elements in hardware stores.

The second option is to make a box from plasterboard. It is made according to the dimensions of pipes and other elements of the communication system. The outer walls of the boxes are designed to match the color of the furniture or kitchen walls.

When choosing the option of how to close heating equipment, you should remember that the gas boiler and communications must remain freely accessible if they need to be repaired or checked for operating condition.

The limited space of most apartments and houses makes adjustments to the installation of gas equipment. To prevent it from spoiling the appearance of the interior, users often start thinking about how to close the gas boiler. However, before you disguise it, it is necessary to take into account the requirements of SNiP in this case. Let's consider various options for hiding a gas boiler without violating the installation rules.

Decoupage

Today, the decoupage technique is in great demand. It consists of finishing surfaces with decorative materials - napkins, which are fixed with PVA glue and varnish for reliability. In this case, you can choose any color and pattern that matches the style of the room.

Related article: Why is an installation better than a floor-standing toilet?

General requirements

Mostly gas boilers are placed in the hallway, kitchen or bathroom. It is easier to close or hide a mounted unit. Before closing a wall-mounted gas boiler in a kitchen or other room, you must ensure that generally accepted requirements are met:

• room volume - at least 7 m³;
• the distance from the floor and ceiling to the gas boiler was 80 cm;
• the cabinet in which the unit is placed should not be closely adjacent to it: gaps are made on the sides - from 5 cm, and in front - from 10 cm;
• the room must have windows for ventilation;
• installation should only be carried out by specialists;
• if the wall is made of flammable material, a fire-resistant shield should be hung between the unit and the surface;
• install a coaxial chimney;
• household electrical appliances should be no closer than 30 cm from the boiler.

It is important to comply with all the listed requirements in order to obtain permission from gas workers to operate this gas system.

Some people are wondering how to close a floor-standing gas boiler in the kitchen. According to the rules, it is installed only in the corner of the room, and the heavy unit can be hidden in a pencil case. Its width and depth must take into account the mentioned gaps, and its height can be any.

How to properly hide a gas boiler in a closet?

Those who want to install a unit in the kitchen are interested in the question of whether it is possible to close the gas boiler with a cabinet. It is possible, if you comply with all safety requirements. It is advisable to first install a gas boiler, and then buy or order suitable kitchen furniture for it. When choosing wall cabinets, you should pay attention to their depth, length and width. These parameters must exceed the dimensions of the device, taking into account safety clearances.

When planning a kitchen with a closed gas boiler, you should think about the following points in advance:

• placement height;
• distribution of heating pipes, water supply, chimney, electrical connection;
• possibility of masking communications.

Note! The communications supply to the unit and the valves must not be closed.

Installation recommendations

The nuances of installation depend on what is installed first - a furniture set or a gas boiler. If the cabinets are installed first, then the block in which the boiler is planned to be hidden is left without a bottom and ceiling to ensure sufficient air circulation. Then they call a specialist who installs the unit inside the cabinet and connects the necessary communications to it.

If the gas appliance has been standing for a long time and there is no desire to call gas workers, you can install the cabinet yourself. Before starting installation, remove the door, roof and bottom, make cuts for supplying pipes and hoses. To add rigidity to the walls, they can be fastened with metal corners.

Note! The bottom and ceiling of the cabinet must be removed to ensure good ventilation.

If both the kitchen set and the gas boiler are already installed, you can disguise the device with a homemade cabinet made of chipboard. To produce it, you need wooden blocks (2.5x4 cm), chipboards and tools. Measure the gas unit and draw a plan of the cabinet taking into account the ventilation gaps: at the top and bottom - 5-6 cm, on the sides - 6-10 cm.

The door must be finished to match the style and color of the installed cabinet.

How to connect a heated floor to a gas boiler?

The volume of the room for a gas boiler and its features

How to block a gas boiler in the kitchen. Kitchens with gas boiler. Placing a speaker in a cabinet

8813 0 0

According to SNiP, the gas boiler is located in the kitchen. This useful unit spoils the interior and needs to be disguised. Get acquainted with effective techniques for installing a gas water heater/boiler in a cabinet that does not violate operating rules.

Solution 1: Safely placing the boiler inside furniture

If you are planning to improve the kitchen space and hide the gas boiler, you need to study the norms, installation and use rules. This is an important point on which your health and life depend.

I will focus on the main points:

1. Placement is carried out on the wall or floor.
2. The gap from the floor is 80–160 cm, from the ceiling – 80 cm.
3. The cabinet used for “camouflage” cannot be adjacent to the walls of the unit. Gaps are made on the sides - from 5 cm, in front - from 10 cm.
4. The room must have windows for ventilation.
5. The power of a household boiler is selected to be no more than 60 kW.
6. Installation and configuration is carried out only by specialists.
7. The distance to electrical appliances and stoves is at least 30 cm.
8. It is advisable to install gas leak alarm sensors.

The chimney must have good exhaust. Its performance is checked twice a year.

Solution 2. We hide the boiler in a closet: decorating techniques

The best option for disguising a white unit is a wall-mounted kitchen cabinet. In this case, the proportions are maintained and the interior style is maintained.

How to choose a cabinet

When purchasing furniture, you need to correlate the height and depth of the cabinet with the parameters of the boiler. In this case, the cabinet should be larger and not restrict air circulation. When planning to camouflage a gas boiler, consider the main points:

• installation height;
• communications wiring;
• hose length;
• method of their installation;
• possibility of installing a mounting box/channel.

Cabinet installation

There are 2 installation methods:

1. A wall cabinet (without bottom or roof) is mounted on the wall. A gas engineer is called and installs a gas boiler. The necessary communications are provided.
2. If the water heater is already installed and you don’t want to call a gas equipment specialist, prepare the cabinet for work and hang it above the gas appliance. Before starting installation, remove the furniture door, remove the roof, and make cuts in the bottom for hoses/pipes. To add rigidity, fasten the cabinet walls with metal corners. Secure the resulting frame over the boiler.

The floor-standing boiler is installed according to the rules - in the corner of the kitchen. If desired, it can be closed with a pencil case. The height can be any, and the depth and width according to the installation instructions.

Solution 3. Gas boiler in a chipboard cabinet

I will name two reasons for using a chipboard cabinet:

1. The boiler is purchased after purchasing the kitchen set.
2. The kitchen design is improved without purchasing new furniture.

In any case, your goal is to decorate the gas unit. The front part of the door is made as similar in color to the set as possible. If the boiler is located between two wall cabinets, you will need to attach a chipboard door to the profile and cover it with film or other finishing material.

To create a full-fledged cabinet, you will need wooden blocks (25*40 mm), chipboards and tools, including a screwdriver and jigsaw. Measure the gas appliance, draw a plan of the cabinet. The top and bottom are made 6 cm larger, with gaps of 6–10 cm left in the front and sides.

Solution 4. Kitchen in a private house: installation rules

An individual house in the private sector differs from city standards. Installation requires compliance with certain rules and regulations. Get to know the most important standards:

1. The height of the ceiling where the gas boiler operates must be 2.5 m or higher.
2. The installation space is at least 4 square meters. m.
3. If installation is carried out on a wooden wall, metal sheeting is required.
4. Setting up and starting is carried out by gas masters.
5. Distance from the meter – from 1.6 m.
6. If ignition is electrical, the socket is located at an interval of 1 m.
7. The chimney is carried out with good exhaust.

Solution 5. Kitchen interior: how to hide communications

Solving the issue of camouflaging the body is half the battle. Communications coming from the appliance spoil the interior of the kitchen no less than the boiler itself. Gas pipes, water hoses, and a bulky chimney are an integral part of the unit and remain visible.

According to safety rules, all connections leading to the gas boiler cannot be completely retracted into the wall. The connection points must remain accessible at all times.

You can decorate communications with a box. To do this, purchase a plastic one of the required size or make it yourself from drywall. The second method has a more solid design, which can later be covered with decorative film or covered with tiles.

The walls of the box should not be tightly adjacent to the hoses/pipes. A gap of at least 1 cm is required.

The gas pipe is usually hidden by furniture and only a small part is visible between the shelf and the desktop. This place is covered with chrome paint or decorated in any of the ways described above.

Corner elements of communications are successfully masked in different ways:

• artificial flowers;
• dummies of fruit;
• hanging panels;
• painted over to match the interior.

Solution 6. Smoke exhaust pipe: how to close

There is a chimney running under the ceiling to the vent. Compared to pipes and hoses, it is larger in size and consists of a corrugated or metal rectangular box.

It is impossible to remove it and our task is to make it less noticeable. We use any available method:

• cover with decorative panels;
• we build a hanging shelf above it;
• seal it with PVC film of a suitable color;
• we use vinyl stickers;
• create a thematic (abstraction, pattern) drawing.

Solution 7. Location and decoration options

The geyser/boiler can be installed in different places. Decoration methods vary depending on location; let’s look at the most common ones.

The gas boiler is located in the corner: what to do

Often the gas unit is installed in the kitchen in the corner. Nearby there is a hanging shelf for the headset.

In this case, an extension is made to the cabinet. A frame is created on which the purchased door is hung. You just need to choose the right fittings and door facade.

This design has no ceiling or bottom. This will ensure good air circulation and communication outlets. There is a second option - the cabinet for the speaker reaches the countertop, the pipes do not need to be decorated.

The boiler in the corner is the most convenient location. If it is located between two wall kitchen cabinets, then a frameless structure is created. The masking door is attached to a strip nailed to the adjacent cabinet.

Parapet gas boiler

The heating system of private houses can run on natural gas. The parapet boiler belongs to the group of individual heating systems. The compact device can be installed anywhere in compliance with safety regulations.

According to the instructions, it is installed on the street 3 m from the house or on a wall with a gap of 30 cm. If you installed it in a room, then there should be no curtains, upholstered furniture or flammable materials nearby.

The large ventilation pipe and pipes leading to the batteries can be disguised by placing them in chipboard boxes. It is advisable to leave the unit itself open, as combustion occurs in it and air access is required.

Parapet boiler placement options:

Despite the heating of the device, some owners hide the parapet boiler in the furniture. In this case, a design is made that allows easy access to the valves and control panel. A household fan is installed in the cabinet with the gas unit to improve the circulation of air masses.

Placing the boiler in the cabinet

A custom-made cabinet cabinet allows you to disguise the gas installation along with connections and pipes. There is also space left for placing kitchen utensils. Craftsmen make such a pencil case themselves.

When creating a cabinet, the following conditions are met:

• presence of air circulation;
• structural stability;
• easy access for maintenance;
• if necessary, the possibility of dismantling.

The front part of the cabinet-case is divided into two vertical doors. If desired, two roll-out boxes are mounted below. In small rooms, wide facades are divided into double doors.

Solution 8: How to close pipes and valves

The boiler is completely hidden in the cabinet, and communications go down or along the kitchen apron. This moment spoils the design - pipes and hoses need to be decorated.

In open areas, a U-shaped box is made of plasterboard, the front part of which is removable. The depth of such a channel is 2–3 cm, width – 3–4 cm. Communications are laid in it and covered with a top panel.

You can buy ready-made plastic channels, they are sold in different colors and sizes, the facade strips are easily inserted and secured with latches.

The valve should be in an easily accessible place. With all your decorative creations, accessing it should take at least 10 seconds, that is, open the door and turn off the gas.

Solution 9: Using decorative grilles

Grids allow air to pass through and at the same time cover the contents. For furniture facades, gratings covered with PVC film are used. You just need to choose the right color.

In the furniture fittings departments there are grilles made from the Ministry of Internal Affairs. They imitate the structure of wood and have different colors. A door with a grill is the best option for a gas boiler.

If you cannot find the desired tone, paint the purchased grille and varnish it. For complete resemblance to the furniture, you can order the production of decorative grilles according to your samples.

Conclusion

A gas water heater/boiler is not an obstacle to creating a cozy interior. A thoughtful design and method of decoration will make the room interesting and beautiful. It is important to comply with all safety requirements.

Source: https://elecmaster.ru/sockets-and-switches/kak-zagorodit-gazovyi-kotel-na-kuhne-kuhni-s-gazovym-kotlom.html

How to disguise communications?

Hiding a gas boiler in a closet is not all. The next pressing question is how to close the pipes and wires of a gas boiler in the kitchen. Gas and heating pipes, as well as electrical wires connected to the unit, look unaesthetic. Therefore, it is also advisable to hide communications.

According to safety rules, communications cannot be completely hidden in the wall; there must always be free access to them. You can decorate communications using a box. Another option is to purchase a ready-made plastic sleeve or make it yourself from plasterboard or chipboard. A homemade box is sometimes covered with film to match the color of the trim or furniture. It is important that the sleeve does not adhere closely to the pipes; a gap of about 1 cm must be left.

Communications are also successfully masked using:

• artificial flowers and fruits;
• painting to match the interior;
• shelves with kitchen utensils.

You can always show your imagination and cover pipes and wires with some suitable decorative item.

How to hide a chimney?

There is a smoke outlet at the top of the boiler. The chimney is usually placed in a corrugated or metal box. It is larger in size than other pipes. There are several ways to hide pipes from a gas boiler:

• cover with decorative panels;
• hang a shelf above the pipe;
• seal with a suitable PVC film;
• disguise with themed decor.

Note! You can close the gas boiler and all its communications using one cabinet, which is located in height from the chimney entrance to the wall to the worktop.

More options for masking a gas boiler and its communications

Let's consider different situations for placing gas boilers and options for their camouflage:

1. When installing a wall-mounted gas boiler in a corner, you can disguise it using a special extension to the cabinet. You will get a frame on which the purchased door is hung.
2. Parapet gas boilers are conveniently located in niches that can be closed with a lattice lid.
3. Parapet-type units are often hidden in small furniture cabinets.
4. Floor units placed in the corner fit well together with communications into a large cabinet.
5. In open areas, pipes are hidden in a U-shaped box.
6. A lattice door covering the boiler will look beautiful.

Note! The gas shut-off valve must always be accessible.

A well-decorated gas boiler will easily fit into the interior and will not disrupt the overall style of the room. There are many ready-made elements on sale that can be used to quickly and easily disguise a gas device and its communications.

Your repost will change the Internet

A gas boiler in the kitchen is a useful element, because it allows you to significantly save on energy resources. But when it comes to repairs, there is a need to camouflage the equipment, because... The speaker does not always fit well into the interior.

Placement of the geyser

It is important to take into account the following rules that must be followed unquestioningly:

• the geyser is mounted exclusively on the wall - it cannot be placed on the floor;
• It is also impossible to place the device close to wall cabinets - it is necessary to provide space for ventilation;
• kitchen cabinets and their outer coverings, as well as wall coverings, must have high anti-flammability properties;
• three main appliances in the kitchen - a stove, a gas water heater or boiler, a refrigerator - must be placed at a certain distance from each other (as a rule, it is at least 30 cm);
• there must also be a distance of at least 100 cm from the electrical outlet and gas meter;
• if the wall is made of wood, then a sheet of metal must be hung under the gas water heater.

In all other options, the following types of design of geysers are found.

Open

One of the options, which is the simplest and less labor-intensive and financially expensive, is an open method of placing the device on the wall in the kitchen. In this case, the kitchen design with a gas boiler on the wall and pipes looks approximately as shown in the photo. It immediately becomes clear that the main disadvantage of this placement is its low aesthetics. Not only does the installation look like a bulky box, but all communication lines remain outside. Which also adds a sense of chaos to the room.

A successful combination of a white boiler with wooden furniture

A modern model of a gas boiler in the style of a kitchen set

In order to somehow play up the metal body of the product, the following decoration techniques are used:

• decoupage - in this case, the design must correspond to the chosen style of the kitchen;
• pasting with various suitable films;
• painting with appropriate paints for metal - this can be either a plain color option or applying various patterns;
• painting - using the technique of airbrushing, acrylic paints, using brushes or spray cans, you can get a unique designer item instead of the usual gas boiler.

All four described methods assume that the gas boiler will not be hidden, but, on the contrary, will become an accent in the interior, which will be quite original and attract attention.

But in this case, it is important to take into account that the execution technique must be of the highest quality so that it does not turn out to be a handicraft item.

The boiler will not be very noticeable if it blends in with the color of the walls

Another solution is to place equipment in the corner of the kitchen behind wall cabinets

Closed

When placing gas equipment in a kitchen where it needs to be closed, the following options should be used:

• masking the front and side surfaces of the gas water heater using sheets of plasterboard, which are folded into a specific structure;
• the use of furniture facades that cover the gas boiler along the front surface, and the side walls are located inside the cabinet.

Both methods of hiding, which are presented above, allow you to maximally disguise and protect the gas boiler from the general surrounding space. Thus, it remains hidden from view without disturbing the uniform design of the kitchen.

But in this case, as in the case of open placement, it is important to choose only materials that have a low flammability rating. Also, when closing a gas boiler inside kitchen cabinets, it is important to maintain ventilation

To ensure ventilation, you can use a cabinet with a lattice door.

In order to ensure air access, it is advisable to cut out the lower and upper parts of the cabinet as much as possible - this way the air will circulate freely around the device.

For built-in placement of a gas boiler, it is better to use a hanging cabinet without top and bottom panels

Examples of successful camouflage

Methods for designing the unit and communications in the kitchen interior can be divided depending on the type of gas equipment in your kitchen in an apartment with autonomous heating, a house or a cottage. Can be:

• with closed burner;
• with open burner.

With a closed camera - the most common and safest option. This type is found in apartment buildings. It can be hidden behind the doors of a wall cabinet or pencil case, or installed in a niche.

In a wall cabinet

The boiler is located above the sink. The bottom of the mezzanine is open.

In this case, it is necessary to take care of the free flow of air to the unit. For this:

• it is impossible to make a close connection between the walls of the boiler and the walls of the cabinet,
• The speaker cannot be placed in a closet. The top and bottom should be left completely open.

This placement option is not the most successful, because... The lower and upper parts are not completely open. But depending on the type of equipment, such an arrangement may be acceptable and comply with safety regulations. See the instructions for the device or consult with gas specialists.

In the pencil case

Installing equipment in a pencil case in the kitchen solves two problems at the same time - masking the device itself and its communications.

The boiler is in the closet by the window.

Headset in the niche

To ensure that the boiler does not stand out in the kitchen interior, you should purchase a set that matches the unit or buy a speaker with a beautiful panel.

In some cases, even in contrast, it does not violate the design.

In the corner

The niche at the sink can be advantageously used for installing a boiler. A hanging row of a headset with a corner arrangement, as in the photo below, can also hide the unit.

Masking the boiler to match the color of the kitchen walls

If you already have a boiler and you are not going to change or paint it, then you can fit it into the interior by painting the walls to match it.

Masking to match the color of the headset

This idea is relevant if you order a set with a ready-made niche for equipment.

In a loft or other style, with industrial motifs, a column with an open ventilation pipe will meet the design rules.

In the pantry

You can build a garage for gas equipment yourself, taking into account all safety requirements.

Painted decor

This method can be relevant for any style:

• in cafe, bar, loft styles.

Design of an individual heating boiler in various styles

If hiding the boiler is not part of the plans of the owners of the room, then it can be decorated to give it a more designer look. In this case, it is important to maintain the same style on gas equipment as in the entire kitchen area. This is the only way to create a harmonious, monotonous interior that will claim to be designer and stylish.

Visually hidden boiler in a modern kitchen

Classic

The classic style involves the use of the most natural natural colors. For example, such as:

• lactic;
• beige;
• Ivory;
• light gray;
• brown;
• chocolate;
• coffee;
• straw;
• neutral yellow.

If we talk about textures, these are mainly natural materials - wood, ceramics or glass. It is important to take this into account when designing and choosing ways to decorate equipment that serves gas. It is also necessary to correctly combine the color and texture of the decor of the geyser and the facade of the set. They must be harmoniously combined with each other.

Open boiler in a classic kitchen with ivory-colored facades

Therefore, for a classic interior, you can cover the geyser with a film in the same tone and with the same texture as the facades of the cabinets in the kitchen. Most often it is imitation wood. But when selecting the material that will be used for pasting, it is necessary to consider whether it can be used on a gas water heater. This way the interior will remain as uniform as possible and will comply with all operating rules.

Provence

To decorate gas equipment in the Provence style, the decoupage technique is most often used. To do this, you need to select images that suit the style - they are usually made in creamy pastel colors and presented in the form of flowers, mills or meadows with lavender or other herbs. When decorating, you must adhere to the technique recommended for decoupage. And it is also worth considering that the pasted images must then be covered with a layer of varnish.

Open arrangement of a gas boiler in a rustic kitchen

Country

Country style is quite simple and unpretentious in its manifestation. It is enough to paint the column in a neutral color that is in harmony with the rest of the surrounding space. And to ensure that the technique does not look too boring, you can use decorative painting. Of course, the motives of the drawings should be fully consistent with the rustic style and harmonize with the kitchen set - it is better to choose images of animals, wild and garden flowers, and simple ornaments.

White color always goes well with natural wood shades

This method is perhaps one of the least expensive, but to implement it you must first prepare the equipment for painting:

• remove the fat layer and possible dirt layer with special solutions;
• use a metal primer, which must be used to treat all surfaces that will be subsequently painted;
• use only heat-resistant enamel on the front and side panels;
• apply the appropriate pattern if necessary.

An example of a boiler design for a country style kitchen

Loft

This style is most in demand lately. Its urbanity, functionality, unusual appearance and ease of use have created a certain fame and success for it. A gas boiler is quite easy to fit into a loft style. To do this, you can use decals with the appropriate image. For example, a steaming cup of coffee and inscriptions will create not only a stylish appearance, but also a cozy atmosphere.

The very style of the loft implies display of equipment and communications, so open placement of the boiler would be appropriate here

If desired, the wall-mounted boiler can simply be covered with a decorative panel in the style of a headset

You can also use special metal casings in the form of cylinders or square metal sections in order to remove heating and water supply pipes and plastic communications behind them. in this case, metal casings can be made of white, black or non-ferrous metal - in all cases they look quite impressive.

High tech

In high-tech style, it is enough to paint gas equipment using special paint in a specific color. For example, it could be a bright shade that will harmoniously match the fronts of the cabinets.

A successful combination of a white boiler panel with glossy high-tech kitchen facades

Red hi-tech kitchen with a geyser inside a hanging cabinet

It would be good if such paint was coated with several layers of varnish on top to give additional gloss, which is very relevant for the high-tech style.

Using the tips presented above, you can easily turn such an unsightly interior element as a gas boiler into a fairly stylish and individual accessory in the kitchen.