How to clean a gas boiler yourself
When the outside temperature is above zero degrees, the automation turns off after a minute. You can run it a hundred times and it shuts down a hundred times. Parapet boiler Zhytomyr. Where and what needs to be adjusted so that the boiler works at any outside temperature?
There is no need to twist anything anywhere! Due to the fact that when the outside temperature rises, the draft from the igniter “blows out” the flame. Tell me, the difference in characteristics, filling of thermal cylinders for Eurosit automatic boilers For boilers degrees.
Malfunction of the Atem parapet boiler, Eurosit automation. The size of the wick torch has decreased; the device does not turn on again after the temperature drops, since the wick goes out. The filter in front of the boiler is clean, the tube on the wick is also not clogged. I enlarged the hole in the wick nozzle - the wick torch increased, and the work returned to normal.
A week later, the size of the wick plume decreased again and the problem returned. I checked everything that I checked before - everything is clean. They advised to increase the size of the wick torch in the boiler automation with an adjusting screw, I twisted the torch and increased it slightly and this did not help.
I also checked the chimney, it is clean. Does the amount of gas at the pilot burner wick nozzle produce a sufficiently large amount of gas? Is the injector clogged with debris? See the technical characteristics of all Zhytomyr floor-mounted gas boilers in total. The device can be equipped with a circulation pump, which is installed as a function. Parameters of the model range of double-circuit gas boilers Zhytomyr parapet type in the table.
From the tables we can conclude and make sure that the wall-mounted and floor-standing boilers of this manufacturer are adapted to the conditions of low gas pressure in pipelines, and this is their huge advantage.
A significant disadvantage is the maximum pressure of the coolant in the heat exchanger, which is possibly quite low. Therefore, you can make sure that Atem gas equipment is more suitable for gravity systems and small houses with one or two floors.
Conclusions and useful video on the topic
The following video will clearly show you the reasons why the burner of a gas boiler goes out:
Do not forget that the problems listed above may not arise if you monitor the condition of the gas equipment and carry out its preventive inspection.
At the same time, if you cannot determine the breakdown yourself or there is already a pronounced smell of carbon monoxide in the room, call a technician immediately.
Have you ever experienced a fading flame in a gas boiler burner? Share your own experiences and troubleshooting options. Please leave comments in the block below, post photos and ask questions about the topic of the article.
