Electric boiler EVAN Warmos Standart – 15
The WARMOS electric boiler is an electric heating device with a mechanical control type, which has 7 stages of power limitation and is available in various modifications. It is used both in heating systems and for preparing hot water in indirect water heaters.
Reliable and efficient WARMOS boilers are manufactured taking into account the characteristics of the Russian climate, electrical networks and consumer behavior, so they are optimally suited for heating residential and industrial premises with an area of up to 270 square meters. m. WARMOS devices can be used in underfloor heating systems provided that a mixing valve is installed. The WARMOS electric boiler is ready for operation immediately after connecting to the heating system.
WARMOS is a heating device characterized by high build quality and optimal technical characteristics. In electric boilers, connecting pipes and contact terminals are located on the upper and lower planes of the boiler, which allows it to be installed in places without access to the side walls.
The STANDART option is suitable for heating systems that already contain an expansion tank, circulation pump, and safety group elements. Thus, it is optimal for use in already operating heating systems as a backup source.
A 7-stage system for limiting the operating power of the boiler allows you to independently select the thermal output in accordance with the current heat losses of the room, minimize the number of switchings and stabilize the air temperature in it. Limiting the power consumption of the device affects the energy consumption. The fewer stages are turned on, the less electricity the device consumes during this period of time. The power of the device, which determines its thermal performance, is selected by turning on key combinations in accordance with the values indicated on the control panel. Connecting devices with a power of up to 8 kW is possible for both single-phase and three-phase circuits.
Having an impressive package, the WARMOS electric heating device is distinguished by its compact overall dimensions and neat appearance. Low-noise operation allows it to be installed even in the residential part of the house. The control panel of the device contains a visual diagram of turning on and off power stages. All modifications of the WARMOS electric boiler can be controlled by EVAN Climate remote control modules
Electric boiler Evan S2 15 (11935)
Buying an Evan C2 15 means purchasing an energy-efficient and inexpensive Standard class electric heating boiler. This is a further development of the popular C1 series. More compact due to improved internal layout, lighter weight, with the ability to universally connect to 220/380V networks in models with power from 3 to 9 kW. Can be used as a main or backup heat source for heating cottages, houses, small retail and warehouse premises. EVAN-S2 is a monoblock that combines a boiler and a control panel in a single housing. The required coolant temperature is smoothly set by the built-in thermostat from 30 to 85 degrees. It is possible to connect an external thermostat, with which you can regulate the air temperature in the room. It is possible to remotely control the heating using Zont H-2 Wi-Fi-Climate modules (not included in the delivery package), which allow you to remotely regulate the room temperature, control the operation of the boiler and monitor its health. To protect against overheating, the devices are equipped with a self-resetting emergency thermal switch, which, in the event of failure of the main thermostat, turns off the boiler when the coolant reaches a temperature of 92 degrees. The heating elements are made of corrosion-resistant stainless steel, which increases their service life; in addition, a clamp is provided for connecting a circulation pump.
The Evan C2 15 boiler consists of the following main parts: - boiler with inlet and outlet pipes G 1 external thread, for EVAN C2 3...7, G 1 1/4 internal thread for Evan C2 9...30 - thermostat sensor - emergency self-resetting thermal switch, shutting down the boiler at 92°C - blocks of tubular electric heaters heating elements - panels with a grounding clamp for connecting the protective conductor PE - control unit consisting of: a bracket with a terminal block placed on it, a terminal clamp for connecting a circulation pump and an air temperature sensor, a starter, a fuse control circuit and fuse of the circulation pump - control panel with control and signaling elements located on it: - "Network" switch - "HEATING" signal lamp - thermostat for setting the heating temperature of the coolant
Delivery set EVAN-S2 15: 1. boiler 1 pc. 2. mounting kit 1 pc. 3. instruction manual 1 pc. 4. individual consumer packaging 1 pc. 5. cuff 2 pcs. 6. repair kit: ring 055-063-46-2-4 GOST 9833-73 1 pc. 7. mortgage
Connection diagram Evan S2 15
Electric boiler Evan Warmos Comfort - 5
Electric boiler Evan Warmos Comfort 5 is a compact mini-boiler room for heating residential households and country houses. It is made in the form of a monoblock mounted on the wall. The boiler is characterized by efficient energy consumption and ease of operation. The boiler is designed for heating rooms up to 50 square meters. m.
Features and advantages of the model:
- Heating elements made of stainless steel;
- Ability to work with heated floors;
- Low noise level;
- High maintainability;
- Possibility of connecting underfloor heating.
Construction and built-in harness
The preparation of the coolant in the Evan Warmos Comfort 5 boiler is carried out using stainless steel heating elements made in the Czech Republic. They are resistant to corrosion and have a long service life. The temperature of the coolant in the heating circuit is regulated from +35 to +85 degrees, the maximum pressure in the system is 3 bar. The boiler power is 5 kW with step regulation (7 steps).
The boiler is equipped with a built-in piping necessary to start the heating system. Inside it there is already a 6-liter expansion tank, a powerful circulation pump, a safety valve and an automatic air bleeder. The boiler is designed for operation in closed-type heating systems with forced circulation of coolant. It is also possible to work with heated floors, provided that a mixing valve is connected.
Mechanical control
The control of the electric boiler Evan Warmos Comfort 5 is manual, mechanical. The controls are located on the front panel of the device. Users can limit the current power and regulate the temperature of the coolant in the system, achieving a comfortable indoor air temperature. The boiler is also equipped with terminals for connecting a room thermostat - it automates the operation of the heating system, automatically maintaining the air temperature in the house. When using a programmable thermostat, you can set daily and weekly cycles.
Optionally, a GSM module can be connected to control the heating system via the Internet or SMS channel. This scheme is beneficial for suburban housing - you can turn on the heating a few hours before the visit and go into an already warmed house or cottage. The GSM module is not included in the basic package; it must be purchased separately.
Silence and safety
The Evan Warmos Comfort 5 electric boiler does not create much noise, which is very important at night. It is also safe - it has an emergency switch that is triggered when the coolant overheats. Additionally, a minimum pressure sensor is provided - when the pressure reaches 0.1 MPa, the boiler operation is suspended until it is restored to nominal values.
Evan Warmos Comfort 5 in the Teplodvor online store
You can buy a wall-mounted electric boiler Evan Warmos Comfort 5 in the Teplodvor online store. We will deliver throughout Moscow and Russia, offer low prices and favorable discounts, and will delight you with a wide selection of radiators, thermostats, polymer pipes and other equipment for the installation of heating systems.
Evan WARMOS START 5 220/380V electric boiler (12945)
Buying Evan WARMOS START 5 means purchasing a practical electric heating boiler that can be used in conjunction with other heat sources as the main or backup. Designed for use in rooms with natural ventilation (no exposure to precipitation, no moisture condensation), at ambient temperatures from +40 to minus 45°C and relative air humidity up to 98% at +25°C. The heating system must be equipped with an expansion tank communicating with the atmosphere. When using a membrane-type expansion tank (expansomat), a safety group must be installed at the boiler outlet in front of the ball valve, including a safety valve designed for a pressure of no more than 0.4 MPa, a pressure gauge and an automatic air vent.
Features of the electric boiler Evan WARMOS START (12945)
Three-stage control. Equipped with one heater block, consisting of three heating elements of equal power. Adjustment of coolant temperature in the range from 30 to 85 Overheating protection is provided by an emergency self-resetting sensor (operation temperature 92±3 °C) Possibility of using both water and non-freezing liquids certified for heating systems with electric heating as a coolant. Possibility of using “warm floor” systems, provided that a three-way mixing valve or hydraulic arrow is installed. The heating elements are designed to operate under a voltage of 220 V. This allows you to use both single-phase 220V and three-phase 380V voltage to connect devices using a star connection circuit. With single-phase power supply, switch I turns on the boiler at 2/3 of the rated power (first stage), switch “II” - at 1/3 (second stage). By simultaneously turning on switches “I” and “II”, the boiler is turned on at rated power (third stage). With three-phase power supply, they can be connected at 1/2 power (when one switch is turned on) or at full power (when both are turned on).
Advantages of the electric boiler Evan WARMOS START
Compact heating device Quiet in operation Heating elements are made of stainless steel. The seal of the heating element block is flanged and sealed with a rubber sealing gasket. Equipped with an emergency self-resetting thermal switch that turns off the boiler at 92 °C Efficiency - 99% Warranty - 12 months
Delivery set: electric boiler WARMOS START: 1 pc. instruction manual: 1 piece individual consumer packaging: 1 pc. cuff: 1 piece
Connection diagram for Warmos Start 3…5 electric boilers to a 220 Volt network
Connection diagram for Warmos Start 3…5 electric boilers to a 380 Volt network
