Zhara - excellent stoves for saunas, reviews from owners

Features and operating experience (from owner reviews)

The market for sauna stoves does not stand still.
It is constantly evolving, offering new and improved designs. Among the variety of models, it is sometimes difficult to decide: the manufacturer puts something special into each that distinguishes it from its analogues. Zhara sauna stoves, produced by the company of the same name from Togliatti, are quite popular today. Installation diagram of Zhara stoves

1. If the floor where the stove is installed is made of flammable materials, then protection should be installed with a metal sheet over a 10-mm layer of asbestos cardboard so that the edges of the metal protrude 250 mm around the perimeter. The distance from the floor to the bottom of the stove should be 100 mm; it is recommended to use a foundation laid in a quarter of a brick.
2. To protect the hot metal body from the intense heat, a protective screen made of brick or other fire-resistant material is installed around the stove. The brick screen is made in ½ or ¼ brick at a distance of 40–50 mm from the furnace body; in its lower part, air passages are arranged in increments of 250 mm. To lay a protective convection screen made of brick, it is better to use oven bricks, and prepare the mortar from sand and red clay.
3. The partition between adjacent rooms into which the heating unit is installed, in the immediate vicinity of the stove on the left, right and top must be made of fireproof materials of at least 500 mm. Read more in the article “How to install a metal stove for a bath.”
4. The chimney must be at least five meters high. Plan a straight option for its placement with a minimum number of knees.

Warning! The manufacturer categorically does not recommend making the connections between the stove and the chimney and the water tank non-separable. This is necessary to prevent fires and ease dismantling.

According to the information posted on the official website of the manufacturer, the advantages of Zhara stoves are:

• Long service life of units up to 20 years. This is achieved due to the cylindrical shape of the combustion chamber and the reinforced arch of the firebox. According to reviews from the owners, the Zhara stove has been used without any complaints for many years. Opinions often positively note the quality of welds, which affects the durability of the structure.
• The heat transfer of the stove is 2 times greater compared to analogues of other stainless steel sauna stoves. This was achieved through the use of durable carbon steel St20, which has the best thermal conductivity, in the manufacture of the firebox.
• The spiral chimney eliminates the direct flow of hot gases; their movement is directed along the heater like a snake. This increases the heating of the stones and ensures fuel savings. According to the manufacturer, the steam room can be heated to 100 °C in an hour or even less, provided that the room is properly insulated. Experience in operating Heat stoves shows that the steam room actually heats up quickly: in the summer in 30 minutes, and in the winter in 2–3 hours.
• The dismountable design of the damper assembly allows for convenient cleaning of the chimney.
• Various ways to attach a water tank - remote, on the back wall, on a pipe. The tanks are easy to install and detach, which allows you to take into account the characteristics of specific rooms. According to owner reviews, the design of the tank allows you to add water without disconnecting it from the stove. It is also noted that the water in the tank remains warm the next day.
• The combination of a simple and original design and high heat transfer provides the best combination of price and quality, which is invariably noted by the owners.

Air flow pattern

Along with the above advantages, the operating experience of Zhara stoves shows some shortcomings, namely:

• Fragile coloring. Additionally, when ordering a protective coating for the stove and pipe assembly, some customers were faced with the fact that the paint simply peeled off.
• Not the best appearance is also indicated in reviews, but some stove owners lined it with brick and the problem disappeared.
• There is no online payment service on the manufacturer’s website; you can purchase goods only by paying a bank account.

Of course, Zhara sauna stoves may not have an elegant appearance, but as operating experience and reviews show, the products of this brand are of excellent quality. There are some disadvantages, but they are not critical and are easily covered by the low price.

Advantages and disadvantages of Zhara stoves

We can talk about the benefits of Zhara sauna stoves for a very long time. In order not to bore you with lengthy stories, we suggest that you familiarize yourself with the key advantages of the units in question. For greater ease of perception, the information is presented in table form.

Table. Advantages of Zhara sauna stoves

Heat stove diagram

Along with numerous advantages, Zhara sauna stoves have a number of disadvantages and shortcomings.

Firstly, the color is fragile. According to user reviews, over time the base enamel coating will simply peel off. To solve the problem, you have to order additional protective coating.

Secondly, not the most attractive appearance. The disadvantage, although subjective, is mentioned quite often. To solve this problem, many owners line the stove with bricks.

Brick case to protect the bath from extreme heat

Brick screen for the Zhara stove with a hanging tank

Thus, even despite the few and in fact not the most significant drawbacks, Zhara stoves can safely be considered an excellent option for installation in a bathhouse. The existing shortcomings are not critical and are fully compensated by high quality, affordable cost and long service life.

Sauna stoves “Heat” with a tank on a pipe photo

What are the advantages of the “Heat” sauna stove?

The Zhara company offers sauna stoves of two categories, differing in the type of fuel:

• gas - Malyutkagaz, Standardgaz and Supergaz;
• wood-burning - Zhara-Extra, Zhara-Malyutka, Zhara-Standard, Zhara-Super.

Come here for health

The Russian bathhouse is an integral part of the culture of our people. People always went there to wash and relax. Village baths are considered the best. They acquired such fame due to the fact that the stoves in them are real, handmade, tested, of good quality, and the secrets of their construction are passed on from generation to generation.

In urban conditions, achieving the desired pairing effect has been difficult for a long time. And all because metal stoves for mass-produced baths did not at all meet the needs of real lovers and connoisseurs of steaming, and rustic samples were too bulky.

We suggest you familiarize yourself with the best way to insulate walls in a bathhouse.

Gas stoves for saunas Heat

These units are produced for heating rooms of different sizes, can be made with different wall thicknesses of the combustion chamber, differ in weight, type of GGU (gas burner device) and cost. Appearance and drawing of the stove in the photo.

Sauna stove "Heat" running on gas

MalyutkaGaz is the smallest representative of this series of sauna stoves. It is designed for heating steam rooms from 4 to 12 m3 and is equipped with an automatic SABK-9 gas generator with a power of 15 kW. Its weight is small - 52 kg, dimensions WxDxH 400x725x575 mm, firebox wall thickness 5 mm. An open heater that can accommodate 100 kg of stones.

Design of the gas sauna stove “Zhara”

The StandardGas and SuperGas models are designed for heating steam rooms from 10 to 24 m3 and are equipped with a more powerful 30 kW SABK-10 gas turbine unit. The mass of the units is 92 and 124 kg, respectively. Their technical characteristics are presented in the table.

Attention. The combustion process of all Zhara gas heating units is carried out only from the adjacent room (from the dressing room or washing room).

Gas stoves are additionally equipped with a chimney and water tanks with a volume of 50, 73 and 90 liters. It is very important to choose the right volume of the water tank, since its small capacity will not provide all visitors with hot water, and a tank that is too large will take a long time to heat up. There are reviews from customers who have encountered this problem.

first you need a small amount to steam the broom, later - to wash yourself before entering the steam room, then some more to rinse after entering the steam room. Based on the maximum consumption at a time, you need to choose the volume of the tank, and not calculate the total amount of water that may be needed for the entire bath procedure.

Technical characteristics of gas sauna stoves “Zhara”

Kinds

When choosing a Heat stove for a bath, you should take into account the internal area of ​​the room. The manufacturing plant produces various modifications of designs that allow you to heat baths ranging in size from 4 to 40 m3. All products are divided into two large groups - gas and wood. The range of wood stoves is represented by the following designs:

• Budget models Extra. They have thin walls and are light weight, so they can be installed without building a foundation. Excellent for heating rooms up to 8 m3.
• Thrifty Baby. Given its popularity among users, manufacturers produce several modifications of this model - 750T, 700, 600T. The products differ among themselves in the depth of the combustion chamber and weight. In these models, the thickness of each wall is 8 mm. The Malyutki 500 E and 600 E are more powerful and of higher quality in terms of heat transfer. You can heat baths with stoves of this series, the internal area of ​​which is 14 m3.
• Standard. Also in demand among owners of country houses and summer cottages. In order to place them indoors, it is necessary to build a foundation. This will help to properly heat the bathhouse and place a structure weighing 120 kg on a supporting base. Steam rooms up to 20 m3 can be heated.
• Exclusive. Such models are installed in bath complexes. The stoves have a wall thickness of 12 mm, which helps to heat a room up to 36 m3 in size. It is also necessary to make reinforcing foundations for these models.

Wood stoves operate on solid fuel and have different combustion chamber depths. The letters U or E indicate wall thickness. U is a reinforced firebox, and E is a firebox with thinner walls. Stoves of this modification are heated from the street, where the combustion mechanism (box) is installed, or from the dressing room.

Gas ovens

• BabyGas. The most compact design from manufacturers, which can heat a steam room with an area of ​​up to 12 m2. Heating is carried out through an open stove, where stones must be placed. They are heated using a gas burner system.
• Standard Gas and SuperGas. Suitable for heating baths up to 24 m3.

Gas sauna stoves “Zhara” are supplied complete with a water tank and a chimney. Heating is provided from the dressing room or washing room.

Wood stoves

Sauna units operating on solid fuel differ in the following indicators:

• the depth of the firebox chamber is from 400 to 750 mm, based on its size, the length of the firewood is determined;
• firebox thickness - models with a reinforced arch are designated “U”, with a thinner “E”;
• type of organization of the combustion process - stoves heated from the dressing room or from the street are equipped with a combustion chamber with a depth of 200, 250 or 350 mm.

“Zhara” stoves do not have the most attractive appearance, but are very reliable and economical

We present to your attention an overview of the technical characteristics of stoves heated from a dressing room or steam room.

The smallest of this series are “Zhara-Extra” and “Zhara-Malyutka”, they are designed for a steam room volume of 4–16 m3 and have a mass of 35–64 kg. The thickness of the firebox wall is 5–9 mm, depending on the model. “Malyutkau” can be equipped with an external firebox. The stoves have an open heater that can hold from 35 to 96 kg of stones, and are the cheapest of all offered by the company.

“Zhara-Standard” were developed for steam rooms with a volume of 14 to 32 m3. They have a firebox wall thickness of 6.5–8 mm and a weight of 80–112 kg. They are also available in standard configurations and with an external firebox.

The Zhara-Super stove is the largest of the wood-burning stoves from this manufacturer. It is designed for heating steam rooms from 20 to 40 m3. It can accommodate 148 kg, the firebox wall thickness is 10 mm.

Heat sauna stoves: photos, characteristics, drawings, diagrams +VIDEO

Additional information about “Zhara” sauna stoves (we previously published reviews about “Zhara” stoves). The brands of stoves and their cross-sectional views are indicated - this may be useful for those who plan to make a homemade stove from a pipe.

Heat standard 500
The stove has a combustion chamber 250 mm wide.

Oven “Heat-standard 500”

Technical characteristics of the stove “Heat-standard 500” Steam room volume 8-22 cubic meters Width 530 mm Depth 250 mm Height 400 mm Thickness of the firebox arch 8 mm Weight 112 kg Weight of stones 100 kg Price 13,600 rub. Drawing of the stove “Heat-standard 500”

Drawing of the stove “Heat-standard 500”

Since the stove is small in size, it is well suited for a small steam room.

Heat-baby 700

The water heating tank is installed on top of the stove.

Oven "Heat-baby 700"

Technical characteristics of the stove “Zhara-malyutka 700” Steam room volume 4-10 cubic meters Power 16 kW Width 470 mm Depth 710 mm Height 690 mm Firebox roof thickness 8 mm Weight 90 kg Stone weight 60 kg Firebox volume 82.6 liters Heater volume 28 liters Water tank volume 40-50 liters Price 12,600 rub. Scheme of the stove “Heat-baby 700”

Scheme of the “Heat” stove

Heat-standard 650

Stove with a hanging tank.

Oven “Heat-standard 650”

Technical characteristics of the stove “Heat-standard 650” Steam room volume 12-18 cubic meters Power 28 kW Width 530 mm Depth 665 mm Height 795 mm Firebox roof thickness 8 mm Weight 125 kg Stone weight 80 kg Firebox volume 117 liters Heater volume 35 liters Volume water tank 60-80 liters Price 14,400 rub. Scheme of the stove “Heat-standard 650”

Scheme of the stove “Heat-standard 650”

Heat-super 800

Visually, the oven is not much different from the Heat-Standard 650 oven. As for the thickness of the metal of the firebox pipe, Zhara-super has it, it is 2 mm larger (10 mm).

Oven "Heat-super 800"

Technical characteristics of the stove “Zhara-super 800” Steam room volume 18-32 cubic meters Power 34 kW Width 530 mm Depth 815 mm Height 795 mm Firebox roof thickness 10 mm Weight 160 kg Stone weight 120 kg Firebox volume 140 liters Heater volume 46 liters Volume water tank 60-100 liters Price 25,500 rub. Scheme of the “Heat-super 800” furnace

Scheme of the “Heat-super 800” furnace

Attentive readers, looking at the diagrams, have probably noticed that in order to increase the power of the furnaces, the outlet of the chimney pipe is shifted relative to the outlet of hot gases from the firebox. Thanks to this simple trick, it is possible to increase the intensive heating area of ​​the upper part of the firebox, above which the heater is located.

Finally, a slightly silly video that advertises sauna stoves produced by .

How to choose

You should choose a wood-burning stove based on the preferred option for organizing the combustion process:

• if you will heat it from a steam room, then it is better to give preference to a model with an enlarged heater without an external combustion tunnel;
• in the case of laying firewood from an adjacent room - stoves with a protrusion-tunnel, determining its size by the type of bricklaying - 125, 200 and 250 mm (for laying ½ brick, “in a block” or “in a brick”).

Diagram of the “Heat” stove with an external firebox

• To heat a bathhouse from the street, you need to choose units with a combustion chamber.
  Diagram of the “Heat” stove with an extended combustion chamber for loading fuel from the street

  Table 3: Technical characteristics of Zhara stoves equipped with a combustion chamber for heating from the street or dressing room

  When choosing, it is also important to take into account that the thicker the wall of the combustion chamber, the longer the service life of the stove and the longer the factory warranty period. For example, for bath stoves with a combustion chamber wall thickness of 4–6 mm, the factory warranty period is 1 year, 8 mm — 3 years, 10–12 mm — 5 years.

How to choose correctly

You should choose stoves taking into account the installation location of the heater. For example, if a wood-burning stove will be located in a steam room, then the heater should have increased dimensions, and there should be no combustion tunnel. If there is not enough space inside the room, then you can choose stoves with a protrusion, which is created during the construction of the foundation. This will allow you to heat the steam room from the street. To lay fuel or stones, you must choose models that have a special combustion chamber.

It is important to take into account the thickness of the walls of the combustion chamber when purchasing. The thicker the material, the longer the Heat will serve its owner.

Additional equipment

Wood-burning sauna stoves Zhara are additionally equipped with water tanks with a volume of 20 to 100 liters with various installation options:

mounted on the back or side wall of the oven.
In the first option, the tank is more tightly adjacent to the furnace body, heating the water faster; “Zhara” stoves are equipped at the customer’s request with different types of water tanks

What types of water tanks are there, what are their advantages and disadvantages, read the article “Sauna stoves with a water tank. Which ones are better?!”

In addition, a chimney and heat exchanger are additionally purchased. protective screens. closed heater, glass door made of heat-resistant glass, protective coating made of heat-resistant paint and various accessories for the sauna. The grate (cast iron in some models) is supplied free of charge.

We suggest you familiarize yourself with How to attach pendants to penoplex

Review of types of stoves for baths “Heat”

Today's market for sauna stoves is filled with a variety of products from various manufacturers, differing in their technical characteristics and performance properties, as well as cost. Among all this diversity, stoves from the Tolyatti manufacturer under the Zhara trademark have proven themselves to be positive and are in great demand among the population. Instructions on how to make wiring in a bathhouse are here: https://banya-gid.ru/stroitelstvo/osveshhenie/instrukciya-kak-sdelat-provodku-v-bane.html.

The picture shows an example of the “Heat” stove

Specifications

Depending on the type of fuel used, “Zhara” sauna stoves are divided into:

• wood-burning stoves “Zhara”;
• “Zhara” stoves running on gas.

Technical characteristics of “Zhara” sauna stoves operating on wood:

• the depth of the combustion chamber varies, depending on the model, from 40 cm to 75 cm;
• width from 40 cm to 54 cm, height from 64 cm to 81 cm;
• the chimney diameter, depending on the model, can vary from 108 mm to 114 mm;
• the marking “U” indicates a reinforced arch of the firebox (from eight to nine millimeters), the marking “E” indicates a thin arch of the firebox (from four to six and a half millimeters);
• the weight of the stove, depending on the model, can range from 35 kg to 114 kg;
• The weight of stones placed in the heater ranges from 60 kg to 110 kg.

Technical characteristics of gas furnaces “Zhara”:

• width from 40 cm to 54 cm, depth for all models is 72.5 cm, height from 57.5 cm to 81 cm;
• the thickness of the firebox walls, depending on the model, can be from 5 mm to 10 mm;
• the chimney diameter, depending on the model, can range from 114 mm to 130 mm;
• the weight of the stove, depending on the model, can range from 52 kg to 124 kg;
• the weight of stones placed in the heater ranges from 100 kg to 140 kg;
• the power of the gas burner varies between 15 - 30 kW;
• The thermal power of Zhara stoves allows you to heat bath rooms with a volume of four to twenty-four cubic meters.

Installation of the “Heat” stove in the bathhouse in the photo

Kinds

The Zhara-extra 400 stove is designed for heating a steam room, the volume of which ranges from four to twelve cubic meters. The design of the stove allows you to organize the loading of fuel into the combustion chamber, both from the steam room, from an adjacent room or from the street. The dimensions of the combustion chamber allow the use of logs up to 37 cm long. The weight of the installed stoves can reach 60 kg. The time for heating a steam room to 100ºC is a time interval of 40 minutes. up to 60 min. The design of the stove allows it to be additionally equipped with a water heating tank. Read the instructions on how to choose a stove for a sauna.

Gas stoves "Zhara" are available in several models. The most compact model, the Zhara MalyutkaGaz stove, is used to heat a bath room, the volume of which ranges from four to twelve cubic meters. The Zhara StandardGas and Zhara SuperGas models are similar in their characteristics. The main difference between the stoves is the thickness of the walls of the combustion chamber, the “Standard” model is characterized by a wall thickness of 0.6 cm, the “Super” model is characterized by a wall thickness of 1 cm. Thanks to this difference, the service life of the “Heat SuperGas” stove (20 years ) much longer than that of the Zhara StandardGas stove (10 years). The Zhara gas stoves also include a chimney pipe and a water heating tank. The tank volume can range from fifty to ninety liters.

Wood-burning sauna stoves “Zhara” are manufactured in several variations. The most compact stoves “Extra” and “Malyutka” are used to heat steam rooms with a volume of four to sixteen cubic meters. The “Standard” stove is used to heat a bath room, the volume of which ranges from fourteen to thirty-two cubic meters. The “Super” stove is used to heat a steam room, the volume of which ranges from twenty to forty cubic meters. Additionally, the stoves include a chimney pipe and a water heating tank. The tank volume can range from twenty to one hundred liters. You can find tips on how to choose and install electrical wiring in a bathhouse here.

Photo

When installing the Zhara gas stove, you should keep in mind that the combustion process is organized from the room adjacent to the steam room, for example, from the dressing room or washing room.

The photo shows the “Heat” stove, running on gas.

When installing a wood-burning stove “Heat”, you should keep in mind that the combustion process is organized either from the street or from the dressing room.

The photo shows the “Heat” stove, burning wood.

When choosing a water tank, you should focus on the thermal power of the sauna stove (whether the stove can heat a given volume of water simultaneously with the room). Heating water should take no more than 10% of the heating power of the furnace.

“Zhara” stoves complete with water heating tank in the photo

Device and installation

Structurally, the Zhara gas stove consists of the body itself, the chimney arch and a pipe for removing combustion products, a heater, and a combustion chamber.

Structurally, the “Zhara” stove, operating on wood, consists of a body with a combustion and blower doors, a grate, a heater, a chimney vault and pipe, and a combustion chamber. Read the guide to choosing an electric sauna stove on this page.

Additionally, Zhara stoves can be equipped with water heating tanks:

• the tank can be fixed to the chimney pipe;
• the tank can be hung on the back or side wall of the furnace;
• the tank can be remote and located at some distance from the stove.

When installing stoves (wood or gas), you should follow some rules:

• a refractory material is laid under the base of the furnace (for example, sheet metal or floor tiles);
• installation of a protective screen is required;
• the wall between the steam room and the adjacent room, into which the stove is supposed to be built, must be made of fire-resistant material, at least at a distance of half a meter from the stove body;
• The height of the chimney must be at least five meters.

Read the instructions on how to insulate a wooden bath.

Cost of “Heat” stoves for baths

The “Heat” sauna stove can be purchased for an amount in the price range from 7,500 rubles. up to 16,000 rub. If the stove package additionally includes a water heating tank, then the price of the stove will increase by 2000 rubles. – 4,000 rub.

Where to buy a “Heat” stove for a bath?

Where to buy in Moscow:

1. Stoves Store, st. Bulatnikovskaya, 20, office. 17. Tel.: + 7 (495) 902-57-82;
2. Iskra LLC, 1st Vyazovsky pr., 4, building 19. Tel.: + 7 (800) 555-12-80;
3. Shop “Bath Stoves”, construction market “Vladimirsky Trakt”, room. No. 18. Tel.: +.

Where to buy in St. Petersburg:

1. Shop "Chimneys and stoves for baths and saunas", Pavlovsk, st. Berezovaya, 16/20. Tel.: +;
2. Stoves store, Tosnensky district, Glinka village, st. Parkovaya, 10. Tel.: +;
3. Iskra LLC, st. Arsenalnaya, 78, lit. A. Tel.: + 7 (800) 555-12-80.

Video

Watch the video for a description of the characteristics of the “Heat” sauna stove:

“Zhara” sauna stoves are distinguished by their combination of simple design, high operating efficiency, long service life of up to 20 years, at relatively low prices.

Additional equipment

Wood-burning sauna stoves Zhara are additionally equipped with water tanks with a volume of 20 to 100 liters with various installation options:

• on a pipe (samovar type) - the tank is installed on the smoke duct or on the stove, which makes it easy to remove;
• mounted on the back or side wall of the oven. In the first option, the tank is more tightly adjacent to the furnace body, heating the water faster;

“Zhara” stoves are equipped at the customer’s request with different types of water tanks

Characteristics and design features

The design of these furnaces is distinguished by its simple, time-tested design, which ensures their reliable performance. The advantages of such a stove for a bath lie in the features of its design.

• A thick-walled firebox up to 10 mm in cylindrical shape makes it possible to operate these units for 20 years.
• The grate has a design that allows it to be replaced in case of wear.
• The damper assembly is made dismountable for easier cleaning of the chimney.
• The water heating tank is made of stainless steel and is optimally selected in volume. It has a well-thought-out location and is easy to remove.
• The spiral-shaped chimney eliminates the direct escape of hot gases during combustion, which contributes to more economical fuel consumption.
• Additional heating of the dressing room due to the ability to install a stove in this room with the front wall removed.

However, it should be noted that Zhara sauna stoves, reviews of which are left by people who bought them , also have some disadvantages. One of these reviews was left by a person who ordered this product online, and this is what he writes:

“Purchasing the Heat-Malyutka 600 stove for me personally had both a number of pros and cons. I will briefly break down this information into sections:

1. Payment for the purchase is made only through Sberbank of Russia, where they deducted 500 rubles and kopecks from me for the transfer. After transferring the money after 3 days, no one told me anything. Naturally I started to worry.
2. The delivery of the goods took place against the backdrop of complete confusion, due to which there was confusion with the payment of transport costs. When unpacking the received container, I did not find a gate unit. True, they sent it a week after I called them.
3. The custom order I made to apply heat-resistant paint did not pay off - everything was peeling off. The same story happened with the water tank, which has a volume of 45 liters. The water in it heats up incomparably longer than the heating of the stove.

But, despite all the problems that arose, I would still like to say about the stove itself, which in the process of use evened the scales of my indignation in a positive direction. Firstly, the bathhouse warms up in about half an hour. Secondly, one armful of firewood is more than enough. Thirdly, it takes up little space.

Review of “Heat” stoves for baths

The choice of stove for a bath depends on the volume of the steam room and the financial capabilities of the owner. These issues are successfully addressed by the Zhara range of stoves. Their main advantages are undoubtedly:

• acceptable price;
• simplicity and reliability of design;
• durability. With proper use, the service life is 20 – 25 years.
• Keeps warm for a long time, the water in the tank remains warm for 10 - 12 hours.

There are some disadvantages as a consequence of the simplicity of the design:

• unattractive appearance;
• very strong infrared radiation.

Both of them are easy to fix, because "Heat" can be used as the basis for any modern stove. It is enough to shield it, cover it with bricks and decorate it - as a result, you can get a rather interesting result. You just need to leave a hole for air circulation to avoid disruption of heat transfer.

New models of the Zhara stove are more improved and manufactured taking into account existing shortcomings. They are equipped with a heater. which allows you to retain heat longer and makes the bathing process more enjoyable.

What Zhara can offer bathhouse owners: range of products

The manufacturing company offers bathhouse owners a wide range of products, which can be classified into 2 main categories. You can find information about them in the following table.

Table. Classification of sauna stoves Heat

Such a characteristic as the peculiarities of organizing the combustion process in the Zhara solid fuel sauna stove deserves special consideration.

Firstly, the stove can be heated directly from the steam room. In this case, it is recommended to give preference to a unit that does not have an external combustion tunnel and is equipped with an oversized heater.

Secondly, firewood can be placed into the firebox from the room adjacent to the steam room. If this option is more convenient for you, buy a model with a protrusion-tunnel. The design of such a furnace is shown in the following image.

Model with projection-tunnel

Thirdly, the Zhara wood stove can be heated from the street. If this option for organizing the combustion process seems to you the most acceptable and preferable, buy a stove with a combustion box.

Stove with combustion chamber

Next, you are invited to familiarize yourself in more detail with the model range of gas and solid fuel sauna stoves Zhara. This can be done in the corresponding tables.

Table. Model range of gas stoves Zhara

Example of installing a gas heater

Design of the gas sauna stove “Zhara”

Average prices for Zhara gas stoves, depending on the specific model, range from 16-30 thousand rubles.

Stoves for Russian baths “Heat”

Zhara solid fuel stoves are classified into categories, each of which includes several models that differ in the following characteristics:

• stoves without additional marking - the firebox arch is 6 mm thick (may vary depending on the specific model);
• stoves marked in the form of the letter “U” - are equipped with a firebox, the thickness of the roof of which is 8 mm (can also vary slightly);
• stoves marked in the form of the letter “P” - the kit includes a special plate for placing a water tank.

Depending on the model, Zhara solid fuel stoves can be equipped with a regular metal door or a door with a glass insert. Devices with panoramic doors are also available. All Zhara solid fuel stoves are heated with wood, so this point is not sanctified in the table.

Table. Model range of solid fuel stoves Zhara

Furnace model	Allowable steam room volume, m3	Ways to organize the combustion process	Maximum weight of laid stones, kg	Steam room heating time to 100 degrees, minutes	Declared service life, years
Extra 400	4-12	From the steam room, dressing room, street	60	40-60	10
Extra 400U	4-12	From the steam room, dressing room, street	60	40-60	20
Baby 400 with combustion chamber	4-14	From the dressing room, the street	60	40-60	10
Baby 500	6-16	Steam room, dressing room	70	40-60	10
Baby 500U	6-16	Steam room, dressing room	70	40-60	20
Baby 500U with combustion chamber	6-16	Street, dressing room	90	40-60	20
Standard 500	10-26	Steam room, dressing room	100	40-60	10
Standard 500U	10-26	Steam room, dressing room	100	40-60	20
Standard 500U with combustion chamber	10-26	Street, dressing room	100	40-60	20
Standard 650U	14-32	Dressing room, washroom	110	40-60	20
Baby 700P	8-18	Steam room, dressing room	60	40-60	10
Standard 700	16-38	Steam room, dressing room	96	40-60	10
Super 700	20-40	Steam room, dressing room	110	40-60	25
Baby 750	8-20	Steam room, dressing room	120	40-60	10
Baby 750U	8-20	Steam room, dressing room	120	40-60	20
Standard 750U	20-40	Street, steam room, dressing room	130	40-60	20

Depending on the model, prices for Zhara solid fuel sauna stoves vary between 8-30 thousand rubles.

Design of the “Heat” stove for a bath

The design of the “Heat” sauna stove is simply ingenious. The idea was based on an ordinary stove - a “potbelly stove”. It consists of the following main parts.

For the manufacture of sauna fireboxes, very high-quality thick-walled pipes up to 10 mm thick are used. Similar ones are used for laying oil pipelines. Their shape may differ depending on where the fuel loading process will take place. The firebox must be connected to the chimney.

It can be purchased complete with the stove or made independently. The chimney design is a coil. A chimney of this shape evens out the draft, saves fuel, and makes it safer, since there are no sudden emissions of flue gas. The convenience of the finished chimney is that it consists of several detachable elements. which can be cleaned of soot as needed.

For a villager familiar with the structure of a conventional stove, such a name as grate is not new. This is a heavy, removable grate on which firewood or coal is placed. After long-term use, it can be replaced with a new one.

An obligatory attribute of a bathhouse is a water tank. They differ in the quality of the metal used, namely its thickness. On the Zhara body there is a place for installing a tank. The large lid on the tank allows you to fill it with water using a container or hose.

By modern standards, the price of Zhara sauna stoves is more than affordable. The stoves of the most popular models can actually be purchased for 10-15 thousand. Considering that it can be installed without the involvement of specialists. then it's very cheap. The cost of work and materials to weld an ordinary “potbelly stove” will cost much more.

In addition, the manufacturer is ready to help you free of charge choose the optimal stove option for the expected volume of the room, its possible load, operating time throughout the year and type of firebox.

“Heat” is designed for the bulk of buyers.

Bath heat stove standard

This model is assembled in a standard configuration or with a combustion chamber of no more than 20 m³. The Standard boiler weighs about 120 kilograms .
This design requires the installation of a solid foundation. The Zhara sauna fireboxes combine advanced technologies, new developments and the secrets of experienced stove makers. The baths where the company's stoves are installed are always scorching hot. Such equipment makes it possible to satisfy the needs of all lovers of bath procedures. The design of heating boilers is as follows: the central part of the furnace consists of a firebox. It is made of pipes with thick walls. They are very durable and are used in the installation of oil pipelines. The pipes are cylindrical in shape. Experts believe that this form is most suitable for arranging a sauna stove.

When installing heating equipment, you need to install a chimney . You can make it yourself or buy it from a manufacturer. The chimney has the shape of a coil. This makes it possible to save fuel consumption. This design allows you to equalize the draft in the furnace. The coil device is assembled from different parts. All of them are collapsible parts. This is convenient when you need to clean the pipe from stove deposits and soot.

Customers' opinions about Zhara stoves

The most important thing that users of Zhara sauna stoves are unanimous about is the excellent quality of work. The manufacturing plant in this sense has an impeccable reputation. Welding work is carried out conscientiously, high-strength materials are used. provides a guarantee of up to 5 years.

There are reviews from buyers who chased a stylish design, lost in quality and, as a result, settled on the simplest “Zhara” model.

There are practically no bad reviews about the operation of the Zhara sauna stove.

An excellent unit, the welding seams are almost invisible, you can feel the hand of a professional.” What I especially liked about “Heat” is the ability to heat from the dressing room, I heat it, and the guests wash.

In terms of heating capacity of a room, “Zhara”, in my opinion, simply has no competitors. But the water does not have time to warm up during the same time. Perhaps I selected the wrong volume of the water tank.

A good sauna is a good stove

The search and development of the design of a compact sauna stove that meets all the needs of buyers led to the creation of the “Heat” model. Thanks to it, the urban population has the opportunity to experience the delights of a rural holiday.

The Zhara sauna stove is a unit that is thought out to the smallest detail and has excellent performance characteristics. Manufacturers took the best from village stoves, improved the design based on modern technologies, and sent their creation into mass production. Now every resident of Russia has the opportunity to choose high-quality, original, real stoves for a bath.

The operation of the Zhara sauna stove has been tested by many years of operational tests. The stove is safe, efficient and convenient, and has a quality certificate. The creators of the Zhara stove sought to embody the secrets of folk craftsmanship and traditions in a convenient format. And they did it with success!

We invite you to familiarize yourself with a DIY brick bathhouse, step-by-step instructions

Stove grates

They play an important role in the firebox. It depends on them how the firewood will lie and whether the draft will be strong. The grate bars have a special design that can be disassembled. This is very convenient, since they fade over time and are replaced with new ones. bars are made of durable metal and have a long service life.

A good sauna is considered to be one in which the heat is scorching, it is always hot and you can produce a lot of steam. The stove plays the main role in this. When purchasing heating equipment for a bath or sauna, you should read customer reviews. If they are mostly positive, then don’t hesitate to buy it. These are exactly the reviews about Zhara sauna stoves. This company cares about the needs of customers, so they even make models that can be heated without entering the bathhouse, from the street.

Model range of stoves “Zhara”

was founded by enthusiasts to design and manufacture stoves for saunas and baths. The company's central office is located in Togliatti. Production is currently developing dynamically, confidently and promises a great future.

The company's excellent products have won the hearts of many customers. Production capacity allows the company to be competitive in a fairly saturated market. The introduction of high-tech welding equipment into production and the use of progressive techniques allow the company to create stoves for saunas and baths of very high quality. Reviews of their work can be found online.

One of the models of the “Heat” stove

The company is absolutely open to communication with its customers and listens to their opinions. One of the main activities of the company is the production of exclusive models, which allows us to satisfy the needs of absolutely any customers.

Currently the company is engaged in the production of the following types of products:

• stoves for saunas and baths;
• heating and cooking stoves;
• boilers

The company creates stoves in several modifications, which have various variations depending on technical characteristics.

1. "Extra". The cheapest models. They are thin-walled and light weight, which allows them to be installed without constructing a foundation. Such a stove is capable of heating a room of up to 8 square meters. m.
2. "Little one." This model is the most popular and has several modifications for different areas and needs. Modifications of the “Baby” 600T, 700 and 750T differ in weight and depth. The wall thickness of any of them is 8 mm. There are also modifications 500E and 600E, differing in power and heat transfer ability. They heat rooms up to 14 square meters. m.
3. "Standard". They have two configurations: regular and with a firebox. Installation of Standard stoves requires the installation of a reinforcing foundation, because the weight of this model is up to 120 kg. Their heating capacity is designed to serve a room of up to 20 square meters. m.
4. "Exclusive" The model is produced for bath complexes because it has a heating capacity designed for a room up to 36 square meters. m. The wall thickness is 12 mm, and the weight of the Exclusive models reaches 200 kg. Their installation necessarily requires preliminary strengthening of the foundation.

Advice from the master!

“Zhara” stoves operate on wood, just like country stoves. They easily adapt to the architectural features of any steam room.

Main types of sauna stoves Zhara

Sauna stoves from the Zhara company are divided into two main categories depending on the type of fuel used:

1. Gas.
2. Wood-burning.

Heating bath units of the first category are represented by such models as:

• Heat is a little gas.
• Heat - standard gas.
• Heat is a super gas.

They differ in the thickness of the firebox arch, weight, volume of the heated room, and also price.

The second category has a wider list of models with various types of modifications and includes the following wood stoves:

• Heat-extra - can heat a room volume of 4 - 10 cubic meters.
• Little heat - these stoves are available in four modifications and are capable of heating a steam room with a volume of 4 - 18 cubic meters.

  

• Heat-standard - they have five modifications with a heating capacity of 4 - 34 cubic meters.
• Zhara-super is the most powerful unit with a firebox thickness of 10 mm, designed for heating rooms of 15 - 32 cubic meters.