Breneran Aqua stoves with a water circuit: operating principle and operating nuances, brief description of models

Russian-made oven ↑

Breneran belongs to long-burning convection ovens

In fact, this stove can only conditionally be considered our own domestic development. Because it is an almost complete copy of the Canadian popular Buleryan stove. But nonetheless…

So, a few words about “Breneran”. And first, about ovens of this type - convection ovens.

The vast majority of modern metal stoves offered on the market have the same principle. Almost all of these devices are convection. Double-hull: inside there is a firebox, often with an afterburner chamber. Flue gases exit into a special smoke pipe at the rear. This makes combustion easier to control by limiting the air flow. The famous Russian stove is built on this principle.

Reviews about the analogue of "Buleryan"

When you have read the reviews about the Buleryan heating stove, it’s time to study Breneran. This equipment is an analogue of a convection device and was developed by Professor Butakov. The unit is identical to the Buleryan, but the latter is the fruit of German developments, while the Breneran was first released in Russia.

The design differs from the Buleryan in the large cross-section of air pipes and their impressive number. They are hidden in the housing, and the air intake occurs at a right angle. According to users, the case is made in the shape of a parallelepiped. The chimney is introduced into the upper plane.

For ash, the design has a built-in drawer, the system is complemented by a grate. It is the chimney entry point that makes using the stove not very convenient. When changing the position of the valve on a pipe, you can easily get burned on the top of the body or the base of the pipe. As consumers emphasize, the rotary damper does not have a lock, and when you try to set the blower yourself, it moves under the weight of the handle.

In the stove, the wood burns almost completely, leaving only a minimal amount of it. According to consumers, defects can be found in Russian-made convection ovens; they are expressed in the absence of elements, as well as poorly executed seams. If you read reviews about the Buleryan long-burning wood-burning stove, you will be able to understand that it does not have such shortcomings. The smallest models of units cost approximately 9,000 rubles.

Features of operation

To use an autonomous sewer system calmly and without problems, it is not enough to know how to make a drainage hole in a private house. You need to use it correctly. Simply pumping it out as it fills is not enough, since over time the bottom and walls of the structure become silted and covered with fatty deposits. This is especially undesirable for filter-type storage tanks, since water from them stops seeping into the ground. And the likelihood of an unpleasant odor in this situation greatly increases.

This problem is solved with the help of special preparations with live bacteria that process sewage. These are powders or liquid compositions that are added to the pit according to the instructions. As a rule, they are poured through the toilet.

Preparations with bacteria for cesspools and septic tanksSource i.ytimg.com

Old deposits in a pit can only be removed mechanically, by scraping them from the bottom and walls or knocking them down with a powerful pressure of water.

Flaws

It is not recommended to load wet wood into the stove. You should not use firewood that produces resins when burning.

The generator gases in the Buleryan burn about 70% in the second furnace. That is why the installation cannot be called perfect.

When installing a chimney, special attention should be paid to its insulation. If this is not done, condensation will be released , which will reduce the performance of the furnace.

The main structural element is the body. Very often it is made of metal. The main source of heat is the boiler. That is why the space around it must be protected. It will be very difficult to protect the space if the buleryan is installed in the corner at the junction of two walls. It is not recommended to install the stove close to a wall. This ban is a big problem for small houses. There should be a maximum distance of 20 cm from the wall to the installation.

If you want to save space, then you will have to cover the walls with metal sheets. Their height must exceed the height of the installation body itself. In this case, you will have to lay basalt insulation between the sheet and the wall. In this case, metal sheets will perform several functions at once:

• protection of walls from heating;
• additional heat source.

It is also worth noting that dust will constantly get into the pipe opening. When the stove burns, a temperature is formed in its channel that is capable of surviving everything in its path. Thus, unpleasant odors will often come from the equipment.

It must be said that during operating conditions, charged ions are formed , which are capable of attracting small particles of dirt. They can enter the human body. If a person's immunity is weakened, this can lead to illness. In this regard, rooms heated by such a stove must be cleaned and ventilated every day.

If you want to buy such an installation, you need to pay attention to what material the boiler doors are made of.

There is a stove with a metal door, it looks beautiful, especially since you can see the fire burning through it. But at the same time, you can only see it when the firewood is burning. In other cases it is useless. Moreover, ovens with such a door have a higher price than usual. Experts do not recommend overpaying, but buying a regular oven with a metal door.

Tips and rules of operation

For the Buleryan heating system, it is necessary to comply with operating conditions, which makes it possible to increase the efficiency of the installation and extend its service life. Comments from numerous stove users show that the most pressing questions are:

• measures to prevent freezing of the coolant when the heating system is turned off;
• reasons for low productivity;
• rules and features of the firebox;
• Is it possible to install the structure outdoors?

How to prevent the circuit from freezing?

When operating the furnace, care should be taken to ensure that the coolant does not freeze. For this purpose, the boilers have a built-in 1 kW heating element. The system is equipped with a sensor that constantly monitors the coolant temperature and turns on additional heating when it drops to a minimum level.

A method of protection is also the complete drainage of water when the system is turned off. In this case, the pipes and housing will withstand frosts down to -50 degrees.

Why does Buleryan start to heat up poorly?

Why can water boilers not heat a room well? The reasons may be as follows:

• incorrect installation/connection (insufficient height of the chimney pipe, poor gas outlet);
• improper installation of the stove with a violation of the height (a distance from the floor of 40-50 cm is allowed, in other cases the performance of the system decreases);
• the wood-burning stove has too low power (the actual power is 10% lower than that indicated in the documentation, which is due to the peculiarities of the installation);
• too many connected radiators.

Firebox features

The Buleryan boiler with a water circuit is heated using the smoldering mode; wood chips, firewood, and paper are used for ignition. Intense combustion is observed only in the first half hour, then the stove should switch to normal mode.

Attention: The stove should not operate at its maximum, the thermal conductivity of the body is limited and the heat will go to nowhere. The efficiency with strong acceleration of the structure will be extremely low, this is a waste of fuel. The principle of lighting the Bullerjan will be as follows:

The principle of kindling Bullerjan will be as follows:

• the gasifier and special regulator open completely;
• light a fire (it is best to use paper and small wood chips);
• after the fire ignites, the chamber is filled to 80%;
• it is necessary to heat until the sensor shows a value of 180-200 degrees (the heating time is no more than 20-30 minutes);
• then the gasifier must be closed at 45 degrees.

Wood fuel is used for the firebox; logs with a size corresponding to the length of the chamber that are not split into pieces are best suited. The firebox door must close tightly; no gaps are allowed. The ash of the heating furnace is not removed; it remains in the chamber throughout its operation.

Outdoor installation

Is it possible to install Buleryan water boilers outdoors? Theoretically, it is allowed, but in practice it is not recommended, since the presence of a “water” jacket will greatly limit the possibility of the device under such conditions.

Design and operating principle

In order to understand how the Buleryan stove with a water circuit is designed and works, it is necessary to understand the principle of operation of the original stove. It originally appeared in Canada. The purpose of its construction is to create a highly efficient unit capable of warming up rooms in a matter of minutes in harsh climates. This is how the Buleryan stove was born, initially without a water circuit. It is a kind of long-burning pyrolysis stove with a built-in convector.

The Buleryan stove without a water circuit is a barrel-shaped structure with pipes sticking out at the bottom and top. These pipes go around the combustion chamber on all sides, forming a productive convector capable of passing through up to several cubic meters of air per hour. Within half an hour after the initial ignition, the room becomes noticeably warmer. In addition to the air convector, the design of the unit contains:

Even if this type of stove is not particularly elegant, it copes with its direct responsibilities perfectly.

• An impressive combustion chamber - a large amount of firewood is placed in it, which guarantees long-lasting combustion;
• Internal partition for the formation of an afterburning chamber - here the afterburning of pyrolysis products occurs;
• Loading door with a throttle valve - firewood is loaded through it and ash is unloaded;
• Chimney - combustion products are removed through it.

Buleryan wood stoves with water circuits can be equipped with economizers. In them, the final heat is removed and gaseous products that are not burned in the unit itself are accumulated and burned.

In models with water circuits, economizers are not particularly needed, since heating here is carried out using radiators.

The operating principle of the Buleryan stove is very simple. Since it is a very ordinary pyrolysis unit, fuel combustion occurs with minimal access of oxygen to the main chamber - the throttle valve on the loading door is responsible for this. The maximum heat release is produced in the afterburning chamber, where the combustion products formed in the first chamber burn out. The resulting heat is released into heated rooms.

If a conventional stove like a potbelly stove heats due to thermal radiation from its body, then Buleryan without a water circuit heats due to convection. Pipes of sufficiently large diameter are used here, completely covering the combustion chamber. The air passing through them is heated to a temperature of +100-120 degrees and enters the rooms. This scheme ensures very fast heating of the premises.

Features of Buleryan stoves without water circuits:

It is the special metal pipes surrounding the combustion chamber that determine such an unusual appearance and high efficiency of the furnace.

• High efficiency - it reaches 80%;
• Possibility of heating several rooms at once - for this purpose, air ducts are organized with distribution throughout the rooms;
• Original design with interesting industrial design;
• Prompt heating due to the powerful convection effect;
• Low housing temperature during operation ensures safe operation.

Buleryan stoves are manufactured by many manufacturers. They have minor structural differences, but in general they are designed approximately the same.

Installation of a water jacket furnace

The Buleryan stove is installed on a fireproof stand at a distance of at least 1 m from the wall (if there is fire-resistant plaster with a thickness of 25 mm or more, the distance can be reduced to 0.8 m).
The dimensions of the stand should be 600 mm larger than the dimensions of the oven (300 mm on each side).

On the floor in front of the door, within a radius of 1.2 m from it, there should be a steel flooring (thickness - 1.5 mm) on an asbestos pad.

Since solid fuel equipment provides much less power control capabilities than gas equipment, it is connected to the heating system according to a special circuit. It is necessary to prevent the coolant from boiling (which can rupture the pipes) or from entering the heat exchanger at temperatures below 50 degrees (leading to the formation of chemically aggressive condensate on the walls of the circuit).

This scheme provides for the presence of a bypass connecting the “supply” and “return” lines, and a safety group:

• safety valve;
• automatic air vent;
• pressure gauge.

When the coolant boils, the safety valve will release excess pressure.

A 3-way valve with a servo drive is installed on the bypass, which is controlled by a temperature sensor. If the temperature in the “return” turns out to be unacceptably low, the temperature sensor will open the 3-way valve and the cold coolant will be diluted with hot coolant through the bypass.

Schematic diagram of using the Buleryan stove

Starting a heating system equipped with a solid fuel boiler is also somewhat more difficult than with a gas heat generator. First, the coolant in the small circuit is heated and only then cold water from the main system is added to it in small portions.

Installation features

General connection diagram with description

Fire safety

For any room where the stove will be located, it is necessary to comply with fire safety standards:

1. The structure can only be placed on a non-combustible base; steel sheets or a concrete floor are perfect for this.
2. A sheet of steel must be laid on the floor near the firebox, the length of which must be at least 1.25 m.
3. The distance from the wall to the stove should not exceed 1 meter for plastered surfaces and 80 cm for surfaces with an insulation layer.
4. The stove can be installed in a room with excellent ventilation and an area of ​​12 sq.m. machines for heating elements are installed only in adjacent rooms.

Correctly installed Buleryan stove according to PPB rules

Installation of a smoke removal system

When installing a chimney, the following requirements must be met:

• materials that are resistant to corrosion, high temperatures, and acids are used;
• the chimney pipe inside must be perfectly smooth;
• The layer of the pipe facing the street is insulated with basalt wool, the thickness of which will be at least 50 cm.

All chimneys are installed vertically; the length of the pipe outlet from the stove to the common chimney cannot be more than 1 meter.

Gravity system

When connecting Buleryan with a water jacket to a natural heating circuit, the following recommendations must be observed:

• The wood-burning stove is placed 50 cm lower than the radiators are installed;
• pipes are mounted at an angle;
• an expansion tank is placed at the highest point (usually in the attic);
• for unheated attics, the installation site of the expansion tank should be insulated;
• supply pipes require a special safety circuit.

Forced circulation

A Buleryan stove with a water circuit is installed together with an additional pump. The scheme includes:

• a circulation pump is installed on the return line;
• Thermal sensors are used for adjustment;
• the circuit requires a closed expansion tank;
• To operate the pump, you must install a UPS with a voltage stabilizer.

Relay connection

Before connecting the relay, it is first necessary to select the installation location of the device, for which the following conditions must be taken into account:

• sunlight must fall on the photo relay;
• sources of artificial lighting should be located at the greatest distance;
• the device must be hidden from the illumination of car headlights;
• The height of the device should allow for minimal routine maintenance work.

Often, if a light sensor is used to connect a street lamp placed on a pole, then the relay is installed near it, but this is very inconvenient. It is much more convenient to place the photo relay on the wall of the house and connect the power cable to the lantern.

How to use Buleryan correctly

The efficiency of buleryan is affected by:

- type of fuel (firewood - type of wood, fuel briquettes, wood waste, pellets,);

— fuel humidity (no more than 20%);

— compliance with the instructions for filling fuel and maintenance.

When developing the design of this device, engineers took into account the laws of thermodynamics. In order for the design of this device to work 100%, it is necessary to use the correct type of fuel and follow the laying rules. In the operating instructions you can see that the manufacturer advises using fuel briquettes or firewood of a certain length and humidity. Provided that all requirements are met, one load of fuel can ensure operation of the stove for about six hours.

Disadvantages of Buleryan stoves with water circuits

Buleryan certainly cannot be called compact. Its installation will require quite a lot of space, and it cannot be placed close to the wall.

In terms of heating rooms, Buleryan stoves with water circuits have no disadvantages - they burn fuel efficiently, releasing maximum heat from it. The problem lies in the removal of ash - it is not very convenient to remove it, since the system often does not have an ash pan. All charred pieces of fuel must be removed through the loading chamber. In addition, Buleryan stoves are quite pot-bellied, so they require a lot of space to install them.

Some users point to rapid clogging of the chimney, but we dare to assure you that this is typical for all solid fuel heating units.

Consumer reviews about the Buleryan Country stove (type 00)

“Buleryan Country” has good reviews. Most buyers loved this model for its versatility. You can easily load firewood and coal into it. At the same time, this stove has good performance and is capable of heating a room with a volume of up to 100 cubic meters. m. Additionally, it should be taken into account that the power of this model is 6 kW.

This “Buleryan” boiler also receives good reviews because its doors are very comfortable. Additionally, many were pleased with the compactness of the model. Its height is 700 mm, width - 480 mm, and depth - 685 mm. In this case, the total weight of the stove is 65 kg. The diameter of the chimney, in turn, is quite significant and amounts to as much as 120 mm. The oven body itself is made of durable steel. In addition to firewood and coal, sawdust, briquettes, and peat can be loaded into the chamber. Taking this into account, this Buleryan stove generally receives good reviews from customers.

The stove is good for a summer house or as an addition to a brick stove ↑

I like the stove - it’s scientifically made. It is good, of course, primarily for the dacha, garage or greenhouse. I wouldn’t put one of these in the house, except perhaps next to the brick one as an additional one. In general, it’s a big plus for the inventors of this design.

These are the reviews about the stove, friends. Different, as we see. It’s understandable - nothing is perfect in the world. And if you have something to say about this stove, please send information about your experience.

bullshit your Breneran is aqua. I worked for 2 winters and the back wall burned out. Now the door is burning out. And in 2013 it cost 25,000 rubles. One stack of firewood is enough for 4 hours. ……now we need to hire a welder.

I bought a Breneran stove for a sauna. In operation for 3 years. It warms well, even with a reserve. But there are two big disadvantages. Which turns all the pros into cons. First, the oven gets clogged and needs to be cleaned once every six months. But cleaning it completely is still a problem. Because there are no hatches or doors for this. There is one hole at the top. But through it, there is no way to get under the flame arrester. You need to be very clever, using a system of cables, with a rag tied to the cable, you can clean it, but it is very inconvenient. You will scratch all your hands on the hole in the heater. Second big minus. The flame arrester is made of thin steel. And it burned out after 3 years of operation. Because of this, the fire flies straight into the chimney? Instead of a bathhouse, you heat the street. The main function of the stove to heat the bath is not fulfilled. You can throw it away. In fact, its service life is 3 years. I don't recommend buying.

Excellent OBJECTIVE review based on my own experience! Thanks for this.

A complete show-off about the miracle oven is said in the video. Let him try it at -35 degrees, load it as he claims, and let’s see how long the burning time lasts. And also about the fact that the stove does not need to be cleaned, it is said about the fact that the pipes can burn out, just like the hardest klasters.

I have been using Buleryan stoves for more than 10 years. Condensation can form in the chimney due to cold pipes. It is imperative to insulate the chimney and use “sengwich”. Properly install the chimney, i.e. Be sure to install a tee and ensure the required height of the pipe, taking into account the location of its outlet on the roof and the power of the stove. The required gas-generating mode of the furnace is determined by the position of the damper (gate) at the Beleryan outlet, and this position is not the same and depends on many factors. You can determine this experimentally during operation. It depends primarily on the draft in the pipe. At the beginning of the kindling (after ignition) until the pipes have warmed up, the draft is worse and therefore it is necessary to close the damper by a smaller amount to switch to the gas generator mode than after several hours of operation. Also, weather conditions, thaw or frost also affect these modes, and therefore when operating such a stove, you must carefully analyze the operation and draw appropriate conclusions. Then there will be no condensation or stench in the house. If you correctly follow the instructions for Buleryan, it will last for decades. And to prevent the back wall from burning out, insert a sheet of ordinary steel into it from the inside (I have ordinary tin).

Reviews about installation features

The Buleryan 100 stove, reviews of which you could read above, according to consumers, should be installed at some distance from flammable objects and materials. The distance should be 1 m. If the surfaces are covered with plaster, then this parameter can be reduced to 75 cm.

“Buleryan” is usually installed on a pedestal, which acts as decoration and serves as a functional element. Inside, consumers advise making a niche for firewood. Usually the base is made of piles.

Stove "Breneran-Aquaten"

The Breneran-Aquaten stove is an all-welded steel structure coated with heat-resistant paint. The stove is equipped with two damper regulators: on the door and on the chimney pipe. Thanks to injectors that perform the function of “afterburners”, maximum CO2 combustion is achieved.

The Breneran-Aquaten stove operates on all types of solid fuel: wood, cardboard, wood, peat briquettes with a calorific value of no more than 13.8 MJ/kg. To maintain a positive temperature in the system in winter (when it is not possible to ensure the operation of the device using solid fuel), an electric heating element with a power of 1 kW is installed.

Schematic diagram of using the Breneran-Aquaten furnace:

It is prohibited to: - operate the stove without a completely filled water circuit; - heat the stove with flammable or combustible liquids; - use coal, liquid and gaseous fuels as fuel; - use firewood whose length exceeds the size of the firebox; - dry clothes, shoes and other items. on the parts of the stove; - remove soot from the chimney by burning; - remove ash and coals from a stove that has not cooled down; - operate the stove in the kindling mode for more than 20 minutes; - operate the stove with the combustion door open; - operate the stove installed differently from what is specified in this manual. manual; - fill the fire in the firebox with water; - make changes to the design of the stove and use it for other purposes.

If all the instructions and fire safety requirements are met, the warranty on the Breneran-Aquaten stove from the manufacturer is 2.5 years.

The Breneran-Aquaten stove has certificates of compliance with the requirements of the State Standard and fire safety of Russia, as well as a sanitary and epidemiological conclusion on compliance with State rules and regulations and is approved for use in Russian cities.

Peculiarities

The Breneran stove was invented by Canadian engineers, who took the drawings of a slow-burning convection-tube boiler as a basis.

Buleryan is a domestically produced device.

Structure

This is an all-welded structure made of steel. On the sides it is surrounded by a large number of pipes. It has a firebox with a wide sealed door, equipped with a blower made in the form of a pipe with a rotary damper (throttle). It is with its help that the power of the heating device is regulated, the process of thermal energy release is controlled, and the required temperature is set.

The device of some models of Buleryan is equipped with a graduated scale and a limiter. If it is necessary to stop the operation of the device or stop the traction, then the throttle is closed. Below are drawings of the furnace.

At the bottom of the firebox there is a steel hearth or cast iron grate, at the top of the structure there is a horizontal partition with holes that does not reach the front wall by about ¼ of the length of the combustion device. Air for afterburning is taken from there.

The upper space, isolated by a partition, is the afterburner chamber when operating in smoldering mode. The gases coming from there go into a horizontal section of the chimney, called a “hog”, its length is 0.8-1 m.

The combustion mode in the Breneran stove is switched using a smoke choke (gate).

The boilers have a chimney with a diameter equal to the size of the blower pipe. 1/4 of the part is cut out in the smoke choke damper. Such a device does not allow the craving to stop; the fumes will in any case come out into the chimney.

An economizer is located above the smoke choke. This is a vertical section of the chimney, well insulated with asbestos. It is designed for combustion of flue gases. Having flared up, they try to expand, which contributes to the formation of a gas plug. The combustion process decreases, the cooling plug eventually disappears, and combustion increases.

Thanks to the economizer, this device has an efficiency of 80%, without it - no more than 60%. The operation of a buller without this element is reduced to 2-3 years.

Popular models of Buleryan stoves

There are not so many Buleryan heating stoves with water circuits. Their main range is represented by domestic units from the Breneran Buleryan brand.

Aquaten AOTV-19

A typical example is the powerful Breneran Aquaten AOTV-19 stove. It can operate on a wide variety of solid fuels, with the exception of coal. One stack of firewood is enough to burn for 12 hours. Its scope of application is heating of country houses and premises for other purposes. The device is made of steel, its thermal power is 19 kW, which is enough to heat rooms up to 190 square meters. m. The price varies between 52-55 thousand rubles.

The model range of these Buleryan stoves is represented by many units, differing in their thermal power and size.

AQUA-Siberia

Buleryan AQUA-Siberia is a furnace with water circuits, available in three versions with a power of 19, 27 or 35 kW. The volume heated by them is up to 1000 cubic meters. The units are made of steel and can operate for up to 20 years. The approximate warm-up time is only 40-50 minutes, and one load of firewood is enough for 7-8 hours of burning. Sawdust, wood chips, eurowood or briquettes can be used as fuel. The main advantage of the model is its excellent rounded design.

Aqua-Breneran

Aqua-Breneran is a combined Buleryan stove equipped with water and air circuits. It heats not only the rooms with water heating radiators installed in them, but also the room in which it stands. The maximum heated cubic capacity is 600 cubic meters. m, the burning time on one tab is up to 9 hours. The stove can operate on any type of fuel, but it is not recommended to burn coal in it - there is a high probability that its metal will simply burn out. The manufacturer is the Breneran company.

How to light a stove correctly

During intensive heating of the room, the active combustion mode is used. But for heating stability, smoldering is required. Pellets, wood chips and briquettes can be used as fuel.

It should also be taken into account that intense combustion during the entire operating time of the unit would cause the metal to burn out. Therefore it is not used.

At the first stage, it is necessary to ensure ignition using fuel, which is characterized by a high burning rate. For example, dry cardboard or wood chips will do. This fuel should be enough for 25-30 minutes. work so that coals are formed already at the moment of complete heating of the room.

The fire must be lit when the damper and throttle are open. Then the door should be closed. After coals have formed, you can begin to throw large logs or briquettes into the firebox.

The throttle is fixed at the desired mode, and the gate is placed in the closed position. Stepwise heating begins with air output at 60-70 degrees.

High-quality heating of the cottage can be guaranteed through the use of models with a water circuit. Heated water begins to move in the heat exchangers. This model is equipped with an ignition compartment - a firebox and a chamber for afterburning gases.

Buleryan water stoves provide rapid heating of water. Moreover, an increase in the temperature of a large volume of it is required. Almost all the energy of the unit is spent for these purposes.

No more than 7-10% of the energy reserve is spent on heating. The coolant is transferred to the heating system or storage chamber. It is recommended to add special antifreeze to the water.

Dacha all year round!

Hi all! Today my review is dedicated to the stove Breneran (Buleryan) AOT-06 type 00 stove with one burner.

We decided to buy a stove for the dacha so that we could come to the dacha all year round. I chose and chose, then settled on the Breneran (Buleryan) brand, since there were the least number of negative reviews.

We arrived at the stoves and fireplaces store, the stove looked very impressive, I liked it! We bought a stove (about 11 tr) + all the pipes (the same amount came out).

We edited it ourselves, YouTube and Google, as they say, help!!

The design of the stove is made in such a way that the pipes from below can absorb cold air, and heating it, ensure air circulation throughout the room. The stove heats the house quite quickly. The stove burns wood for a long time, that is, you only need to add firewood once every 6 hours (as the manufacturer claims, it’s certainly not enough for 8-10 hours). But compared to the “potbelly stove”, which needs to be refilled every 2 hours, this is simply paradise!

Now about the area for which the stove is designed. It is stated for a room volume of 100 m³.

At first, our stove was located in a room of about 41 m³, it warmed up the room very quickly, even in frosty weather of -25 degrees it was possible to walk around half-naked. But when the stove reached its maximum temperature, it was difficult to stay in the room.

At the moment, the stove is in a room of about 72 m³, of course it takes a little longer to warm up, but literally after a couple of hours the whole room warms up quite evenly, we run around barefoot and in T-shirts. The heater would definitely not be able to cope with such a volume.

Regarding the stove, I personally tried to cook something on the stove, but somehow it didn’t work out for me, it seemed a bit long to me, and I definitely won’t stand over the stove and wait! Although in the future I’ll try to cook something else in a cauldron, I might like it :) At the moment, water is heated on the stove, a bucket of water heats up quickly enough, and always finds use in everyday life!

And the savings have not been canceled; energy costs are reduced significantly.

No cons as such were found. Of course, there are nuances associated with the stove, let’s say you are going to some kind of buffet, but in the house with the stove there is still the smell of wood, so things may also smell a little like wood

But here it is important to distinguish between your social status, your leisure time, etc.

Pros: Good furnace efficiency; Quickly heats up the room; Adding firewood every 6 hours; Made of steel; Availability of a comforter; Saves energy costs.

Cons: Requires quite a lot of space for installation.

Result: We are very pleased with the stove, we have never regretted the money spent. In operation for about 4 years. I recommend to buy!

I have already presented a comparative review of various heating stoves, which, as practice shows, are in the most active demand among Russian consumers. However, individual designs of furnace devices require additional review. And dialogue with the consumer. This is the domestic Breneran stove - there is a special interest in it. You can read more about its device here, and also watch the video

In this article I want to focus not so much on the advantages of the stove (they will tell you about them in advertising!), but on some of the nuances that real consumers themselves pay attention to

Reviews about the features of using Buleryan in a residential building

For temporary residences and country houses, Buleryan is the ideal solution. However, many consumers, in their words, doubt whether it is worth installing such equipment in residential premises. Here the opinions of buyers differ, so it is worth taking a more serious approach to studying this issue.

After reading reviews about the Buleryan stove, you can understand that such an installation can have a negative impact on the healthy atmosphere at home. With a portion of air, ordinary dust is drawn into the structure, which first heats up and then begins to burn. Thermal decomposition does not require too high a temperature. Buyers emphasize that combustion products of dust particles are present in the air and can have a negative impact.

In order to get out of this situation, you need to purchase “Buleryan” and a regular stove. The first will heat the house, and the second will maintain a constant temperature. Experts emphasize that if the Buleryan is positioned correctly and the basic rules and frequency are observed, it is permissible to use such an installation in a residential building.

Models with a water circuit

Traditional designs are not equipped with a circuit. Such a unit can be improved and used to heat several rooms. Special thermal chambers with metal gratings are created around. They perform the function of taking in cold air.

Oxygen through pipes distributes heat to other rooms and spaces. The design has a simple operation scheme. Craftsmen can independently organize heating in apartments, private houses, and outbuildings. The only drawback is the rapid cooling of the air inside the pipes. This is due to the limitation of their length. Before installation work, you need to select a place where the stove will work. This rule helps reduce heat loss.

The circuit is made from metal pipes

The water does not cool quickly, so a high level of heat capacity is ensured. Several radiators or circulation pumps can be connected to the structure. These devices are often used to connect to batteries and pipes.

Buleryan with a circuit is a modified and improved version of a traditional stove that accumulates air. The chamber is surrounded by pipes that are bent at a certain angle. They form a convector that conducts and accumulates heat well.

All tubes are welded into one structure, so the result is a manifold. Additionally, a return pipe is installed. A similar procedure is done with the upper pipes.

Experts' opinion about the Buleryan Classic stove (type 01)

In general, experts consider this model comfortable and powerful. At the same time, it has all the advantages that are displayed in previous models. The secondary camera of the device is quite durable. The thickness of the metal in this place reaches 4 mm. Experts also noted the convenience of the loading compartment. Its door fits tightly and provides a good seal.

The front wall is quite strong and protects the injector well. All power controls are easy to adjust. The chimney handle, in turn, is securely fastened. Additionally, many experts positively noted the operation of the blower, which is hidden behind the rear panel. In general, this model can be characterized as a practical and powerful device for heating large houses.

Advantages and disadvantages of the design

• Fast and uniform heating of the room;
• Easy to install, operate and maintain;
• High efficiency - 80%;
• Economical consumption of fuel materials;
• One of the longest periods of operation among furnaces (on one fuel bed);
• Versatility of use (the device can serve dachas, country houses, garages, shops, greenhouses, greenhouses, farms, hangars and much more).

But this heating device also has disadvantages:

• Buleryan runs on only one type of fuel – wood;
• To reduce the fire hazard of the device, it is imperative to insulate the chimney pipe;
• Burning dust on the stove body causes an unpleasant odor;
• As a result of the fire, caustic condensate forms in the chimney, which requires removal.

Please note: the level of condensation in the chimney of the Buleryan stove can be reduced if you use only dry wood as fuel.

Reviews of the Buleryan Country stove (type 01)

“Buleryan Country” has a variety of reviews. As some buyers say, this model is large in size and is not suitable for many. The oven height is 845 mm, width is 560 mm, and depth is 810 mm. Overall it's quite pleasant to use. Wood or coal is very convenient to load. At the same time, the doors to the chamber open well. Its handle is comfortable and made of steel. The oven body, as before, is very durable. The thickness of the metal is exactly 4 mm. In this case, the efficiency is at the level of 75%. It is very convenient to regulate the power.